I want to communicate to an ARM microprocessor via i2c protocol (Multitech mDot, which uses Mbed platform). I successfully receive data from it (and got it displayed on Arduino's serial monitor), but when I want to send data from the Arduino I don't receive nothing on the other end. This is my sketch:

#include <DHT.h>
#include <Wire.h>

// Sensor temperatura, humedad DHT11 (test).
#define DHTPIN 10
#define DHTTYPE DHT11
DHT dht(DHTPIN, DHTTYPE);

// Comunicacion i2c con nodo lora. 7bitaddress 010 1001 (r/w)
#define SLAVE_ADDRESS 0x29

// Variables globales de sensores
float h;
float t;

void setup() {
  Wire.begin(SLAVE_ADDRESS);
  Wire.onReceive(receiveEvent);
  dht.begin();
  Serial.begin(9600);
}

void loop() {
  delay(5000);
  h = dht.readHumidity();
  t = dht.readTemperature();
 
  // Comprobamos si ha habido algún error en la lectura
  if (isnan(h) || isnan(t)) {
    Serial.println("Error obteniendo los datos del sensor DHT11");
    return;
  }
 
  Serial.print("Humedad: ");
  Serial.print(h);
  Serial.print(" %\t");
  Serial.print("Temperatura: ");
  Serial.print(t);
  Serial.println(" *C ");

  Wire.onReceive(receiveEvent);
}


// Total de bytes del arreglo de datos a transmitir: 28 bytes.
void receiveEvent(int howMany) {
  Serial.print("Mensaje recibido por i2c desde MDOT LoRa Node: ");
  while (Wire.available() > 0) {
    Serial.print(char(Wire.read()));
  }
  Serial.println();
  char enviar = "Cacatua";
  Wire.write(enviar);
  return;
}

I want to communicate to an ARM microprocessor via I2C protocol (Multitech mDot, which uses Mbed platform). I successfully receive data from it (and got it displayed on Arduino's serial monitor), but when I want to send data from the Arduino I don't receive nothing on the other end. This is my sketch:

#include <DHT.h>
#include <Wire.h>

// Sensor temperatura, humedad DHT11 (test).
#define DHTPIN 10
#define DHTTYPE DHT11
DHT dht(DHTPIN, DHTTYPE);

// Comunicacion i2c con nodo lora. 7bitaddress 010 1001 (r/w)
#define SLAVE_ADDRESS 0x29

// Variables globales de sensores
float h;
float t;

void setup() {
  Wire.begin(SLAVE_ADDRESS);
  Wire.onReceive(receiveEvent);
  dht.begin();
  Serial.begin(9600);
}

void loop() {
  delay(5000);
  h = dht.readHumidity();
  t = dht.readTemperature();
 
  // Comprobamos si ha habido algún error en la lectura
  if (isnan(h) || isnan(t)) {
    Serial.println("Error obteniendo los datos del sensor DHT11");
    return;
  }
 
  Serial.print("Humedad: ");
  Serial.print(h);
  Serial.print(" %\t");
  Serial.print("Temperatura: ");
  Serial.print(t);
  Serial.println(" *C ");

  Wire.onReceive(receiveEvent);
}


// Total de bytes del arreglo de datos a transmitir: 28 bytes.
void receiveEvent(int howMany) {
  Serial.print("Mensaje recibido por i2c desde MDOT LoRa Node: ");
  while (Wire.available() > 0) {
    Serial.print(char(Wire.read()));
  }
  Serial.println();
  char enviar = "Cacatua";
  Wire.write(enviar);
  return;
}