user3629249
  • Member for 6 years, 11 months
  • Last seen more than a month ago
Split serial monitor output to only save part of the output
1 votes

implement a circular buffer of say 30 characters. clear the circular buffer read into the circular buffer, char by char when the last 13 characters in the buffer are: :4CAA0DE091B7 Then the prior ...

View answer
Arduino program to Blink L LED when input matches a set pattern
1 votes

The following proposed code: corrects the worst of the logic problems eliminates unused/unnecessary local variables performs the desired function keeps data declarations local to where they are used ...

View answer
Two ints declared simultaneously, one "does not name a type"
Accepted answer
0 votes

the following code is properly indented is missing the declarations of the variables for the 'button states' and the 'prior button states' has additional text about a format error is properly ...

View answer
Problem reading an EEPROM chip using the I2C protocol
0 votes

Without the specific chip info this will be difficult. However, my experience with EEPROMs and I2C is that the first action is to write a command, then write the parameter(s) for that command, then ...

View answer
ISR executes even though an interrupt is not triggered
0 votes

ISRs have flags, typically an enable flag and a pending flag. The enable flag needs to be set true for the interrupt to occur at all. The pending flag is set when the interrupt event occurs. ...

View answer