fabianoriccardi
  • Member for 1 year, 10 months
  • Last seen more than a week ago
Arduino Uno won't connect when using USB-C to USB adapter
Accepted answer
4 votes

Maybe it is not original, and it uses different usb-serial chip than the original one. Popular converters for Arduino Uno clones are CH340 and CP2104. You may try to install the driver for these 2 ...

View answer
ESPTOOL not recognizing ESP32-S2 chip for SPIFFs transfer
Accepted answer
1 votes

Is the missing double dash? esptool.py --chip esp32s2 --port COM3 --baud 115200 write_flash -z 0x110000 filename.spiffs.bin

View answer
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1)
0 votes

I suppose your are using Arduino IDE (maybe 1.x.x), if so, you should install the exception decoder so your can read such hex codes. They will give an more useful hint about the error location. Here ...

View answer
Arduino Core for the Raspberry Pi Pico
2 votes

It is worth mentioning this excellent alternative to the Arduino one from Earle F. Philhower. It seems well-maintained and doesn't depend on Mbed OS, so it leaves more space (ram and flash) for your ...

View answer
Why does the LEDs affect Analog Input?
0 votes

Which model of LED are you using? 5050 is just the form factor. However, I think the problem is related to power consumption. The well-known WS2812B (a.k.a. Neopixel from Adafruit), may consume about ...

View answer
Several ESP8266 in wifi network should share information
Accepted answer
2 votes

I guess you are asking if it is feasible: if this is the case, I would say yes, without too many troubles. Each ESP can launch MDNS discovery, so they can discover each other.

View answer
Typedef struct not working
1 votes

There are 2 errors: you are returning a class type, and not the temp object RGB func(){ RGB temp; return RGB; --> return temp; } To use your typedef you should put the struct "name" ...

View answer
How to use I2S in ESP boards?
0 votes

Few months ago I tested successfully I2S with this library, I used the default pins: bck_io_num = 26 ws_io_num = 25 data_out_num = 22 which are available on many boards such as Lolin D32.

View answer
Pca9685 & WS2818B, 1 Nano
0 votes

I was looking at WS2818B datasheet, they do not use i2c. It just needs a single ( dedicated) pin to receive the color/brightness commands.

View answer
Display a Random Number to Display for T Seconds With Millis() for Dice Roller
Accepted answer
1 votes

I would recommend to not reinvent the wheel, and proper button management may not be so trivial. I would suggest this library to address your problem.

View answer
Serial.print array displays nothing
Accepted answer
0 votes

Test on my Arduino Uno, your code works fine with a simple copy-paste. Remember to set the proper baud rate.

View answer
Where to find the attribution name for a certain board?
1 votes

If you are working on Maple Mini, you may look in this folder, you will found the pin mapping between STM32 and Arduino nomenclature.

View answer
Include Git tag (or SVN revision) in Arduino sketch?
2 votes

I met the same problem and based on the previous answers I wrote this script for Arduino IDE. I'm using it successfully on different OSs for many months to now. In the repository, you can find the ...

View answer