Skip to main content
Jot's user avatar
Jot's user avatar
Jot's user avatar
Jot
  • Member for 7 years, 5 months
  • Last seen more than 4 years ago
3 votes

is there a timeout for Ethernet.begin?

6 votes

CPU information on Arduino Serial Monitor

-1 votes

measure +3V and -3V through resistor divider and switch on/off by digital pins

1 vote
Accepted

Start / end events using milis

2 votes
Accepted

Problem with reading data from HMC5883L in GY-86

1 vote
Accepted

How to read this hmackey for arduino?

2 votes
Accepted

HMAC SHA256 in Arduino use case?

1 vote

Questions about HMC5883L library

1 vote
Accepted

VirtualWire `vw_get_message`: docs and examples on the PJRC site

2 votes

Issue with Indenting the Serial Print data in the Serial Monitor

6 votes
Accepted

Arduino Pro Micro - switch off LEDs

2 votes

LED on same Pin as Toggle Switch, not illuminating

1 vote
Accepted

Wire with MCP23008 I/O expander with I2C

-1 votes

switching two relays without delay using millis

0 votes
Accepted

Generate a ramp input with an Arduino Uno

2 votes
Accepted

What data type are the analog pin labels (A0, A1, etc)?

2 votes
Accepted

How to initialize digital output pin as low

2 votes

Need little bit of help on testing I2C sketch

2 votes

RGB and Potentiometer

0 votes

Trying to use an LCD 1602 to display, but I don't have a 10 KOhm potentiometer

1 vote
Accepted

Risks when commanding multiple chips with same address via I2C

1 vote
Accepted

Issues with I2C and Wire.Available()

2 votes
Accepted

Interpreting pull-up values Rp and Rpu in AM3202 (DHT22) datasheet

1 vote

Is this a good way to filter noise due to vibration in limit switch?

5 votes
Accepted

Digital I/O threshold voltages for ATmega32u4

1 vote

Would a 100KΩ resistor connected to ground pull an open analog line down to 0

2 votes
Accepted

Arduino Analog pins go all to high problem

2 votes
Accepted

MKR WIFI 1010 Providing 3.3V to breadboard

2 votes

Memory problem? dtostr() and strcat()

0 votes

Analog output gives a close range of values

1
2 3 4 5
8