A tag is a keyword or label that categorizes your question with other, similar questions. Using the right tags makes it easier for others to find and answer your question.
the most common of the Arduino boards. It is based on the ATmega328P microcontroller.
the standard USB connection between the Arduino and a computer with a standard USB A to B cable or through the TX/RX pins using a USB to serial converter. It can also refer to …
An IC that offers Wi-Fi networking compatible with b/g/n standards. It also has integrated TCP/IP protocol stack. Extremely popular along IoT community as a low cost and powerful board.
A microcontroller board based on the ATmega2560 or 1280 chip. Use this tag for questions specifically regarding the Mega, and not just general Arduino usage.
The process of designing and writing source code as part of a program (or sketch) for Arduino. For questions about uploading code to an Arduino board, use the [uploading] tag instead.
for questions about the official IDE. The open-source IDE makes it easy to write code and upload it to any Arduino board. It runs on Windows, Mac OS X, and Linux.
for questions about selecting, connecting, using, and debugging sensors.
a small board based on the ATmega328 or 168. It has male headers, so it can be plugged directly into a breadboard. It is small and compact, and features a USB chip.
the standard language used to program the Arduino IDE. However, the Arduino IDE does have lots of libraries built in, so functions such as "main" are not called directly in the sketch code. Mos…
for questions regarding powering and/or power consumption of Arduino systems.
a type of light source which is typically fairly small and has low power requirements.
a bus for low speed peripherals. Use this tag for questions regarding how to use I²C with an Arduino, or for problems with I²C and your Arduino.
a trademark of the Wi-Fi Alliance. A Wi-Fi enabled device such as a personal computer, video game console, smartphone, or digital audio player can connect to the Internet when within range of…
for questions about connecting, controlling, and safely operating motors using an Arduino board.
Bluetooth enables short-range wireless communication between devices.
LCD stands for "Liquid Crystal Display" and is commonly known as a screen. The tag should be used for questions related to LCD display.
For questions about NodeMCU, an open source IoT platform which includes firmware for running on the ESP8266.
Interrupts allow the processor to suspend normal operation temporarily so that a high-priority software or hardware event can be handled instead.
Widely used standard for connecting computers to other devices, such as printers and keyboards.
a type of motor which uses a feedback mechanism for precise control of speed and position.
a file that can be included into the code to add new instructions by combining many existing instructions and creating one easy to use instruction to call.
a form of signal modulation that allows digital output to approximate an analog signal. Use this for questions about using the PWM pins (marked with ~).
like gateways between the Arduino code running on the chip and the components attached to Arduino. It can refer either to the physical connectors on the board, or it can refer to the pins d…
an microcontroller card based on the Atmel SAM3X8E ARM Cortex-M3 CPU. This is a 32bit ARM core MCU.
the chip that is the heart of the Arduino Uno. It is popular also as a chip to use to create your own board. Since it is available in the through hole version, it can be placed on a b…
a procedural programming language which is widely used in embedded systems. PLEASE NOTE: Arduino is typically programmed in C++, not C.
A library for emulating UART functionality in software on any available digital IO pins. Use this tag for questions regarding SoftwareSerial.
Serial Peripheral Interface. Allows full-duplex serial communication from a master device to one or more slave devices arranged on a bus. Sometimes referred to as a 4-wire bus.
the hardware in the processor used to count and time events. Use this tag for questions about the hardware timers.
a very widely used standard for communication over mobile phone networks.
for questions about communication between multiple devices.
A cheap and low-power microcontroller family using Tensilica Xtensa LX6 CPU cores with integrated WiFi and dual-mode bluetooth.
attachments that "snap" onto the Arduino board adding functionality. They are usually the same shape as an Uno/Leonardo/Duemilanove. Some examples are: the Ethernet (includes SD port) shie…
often used with the Arduino Ethernet Shield. They stand for "secure digital cards" and fit into one's palm. They range from 256MB to 128GB, although most Arduinos only use 4GB. There are …
an open-source hardware company founded by Limor Fried in 2005. Use this tag to mention issues with Adafruit products or tutorials.
An Arduino board based on the ATmega32u4 chip with built in USB HID functionality