i have Vector nav100 IMU sensor that sends data serially UART.I want to receive data from it using ATmega32 and then store data in AT24c1024 EEprom using I2C,then using another ATmega32 to read the saved data on AT24c1024 EEprom using I2C to control a servo motor..so,the AT24c1024 EEprom is then shared between the two microcontrollers...i have serached the internet about how to share one  External serial EEprom,i found that......(On way would be for the two  mcrocontrollers to have an output line as an input to the other. A master that is "using" the EEPROM perhaps pulls his output low (or high - your choice) to say "I'm using it at the moment". The other reads his input first before going near the EEPROM if he finds the line active he backs off until it is set inactive by the other master.i tried that but i failed...can any one help me on this solution or  give me another solution?
Thanks in advance......