Got this module from Aliexpress
[![enter image description here][1]][1]
W5500 [Ethernet Network Modules For Arduino][2] TCP/IP 51/STM32 SPI Interface 3.3V 5V I/O MCU
... and trying to hook this up to my proto Aduino Micro as thus:
Micro -> W5500 module
5V (J6.6) -> 5V (I noted that it has a linear regulator to 3V3 on the W5500 board)
IO11 (J5.16) -> RST ... (I connected it to Pin 11 so that I can do a manual reset, to see if it made a difference, it didn't)
IO10 (J5.15-> SCS
SCLK (J6.1) -> SCLK
MISO (J6.2)-> MISO
MOSI (J5.1)-> MOSI
GND (J6.4)-> GND
I then used a modified version of WebServer to test the functioning of the module:
/*
Web Server
A simple web server that shows the value of the analog input pins.
using an Arduino Wiznet Ethernet shield.
Circuit:
* Ethernet shield attached to pins 10, 11, 12, 13
* Analog inputs attached to pins A0 through A5 (optional)
created 18 Dec 2009
by David A. Mellis
modified 9 Apr 2012
by Tom Igoe
modified 02 Sept 2015
by Arturo Guadalupi
*/
#include <SPI.h>
#include <Ethernet.h>
int counter = 0;
const int W5500_RESET_PIN = 11; // the number of the pushbutton pin
// Enter a MAC address and IP address for your controller below.
// The IP address will be dependent on your local network:
byte mac[] = {
0xDE, 0xED, 0xBE, 0xEF, 0xFE, 0xED
};
IPAddress ip(192, 168, 2, 177);
// Initialize the Ethernet server library
// with the IP address and port you want to use
// (port 80 is default for HTTP):
EthernetServer server(80);
void setup() {
// Open serial communications and wait for port to open:
Serial.begin(9600);
while (!Serial) {
; // wait for serial port to connect. Needed for native USB port only
}
// Reset the W5500 module
pinMode(W5500_RESET_PIN, OUTPUT);
digitalWrite(W5500_RESET_PIN, HIGH);
digitalWrite(W5500_RESET_PIN, LOW);
delay(100);
digitalWrite(W5500_RESET_PIN, HIGH);
delay(100);
// start the Ethernet connection and the server:
Ethernet.begin(mac, ip);
server.begin();
Serial.print("server is at ");
Serial.println(Ethernet.localIP());
}
void loop() {
if (counter > 0) counter--;
else
{
Serial.print("server is at ");
Serial.println(Ethernet.localIP());
counter = 10000;
}
// listen for incoming clients
EthernetClient client = server.available();
if (client) {
Serial.println("new client");
// an http request ends with a blank line
boolean currentLineIsBlank = true;
while (client.connected()) {
if (client.available()) {
char c = client.read();
Serial.write(c);
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank) {
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println("Connection: close"); // the connection will be closed after completion of the response
client.println("Refresh: 5"); // refresh the page automatically every 5 sec
client.println();
client.println("<!DOCTYPE HTML>");
client.println("<html>");
// output the value of each analog input pin
for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
int sensorReading = analogRead(analogChannel);
client.print("analog input ");
client.print(analogChannel);
client.print(" is ");
client.print(sensorReading);
client.println("<br />");
}
client.println("</html>");
break;
}
if (c == '\n') {
// you're starting a new line
currentLineIsBlank = true;
} else if (c != '\r') {
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
// give the web browser time to receive the data
delay(1);
// close the connection:
client.stop();
Serial.println("client disconnected");
}
}
The code runs ok, and as you can see I'm printing out debug comms and monitoring using TeraTerm on the USB virtual port. However I'm seeing this output:
server is at 222.237.190.239
server is at 222.237.190.239
server is at 222.237.190.239
server is at 222.237.190.239
server is at 222.237.190.239
server is at 222.237.190.239
So ... the IP address didn't take, and needless to say that the webpage didn't show up when I typed in the IP address 192.168.2.177.
I've tried two identical W5500 modules so far and the problem persists for both in a consistent way. I've looked on the scope and I can see the SCLKs shooting across in 4 lots of clock bursts per each SCS low going pulse, with both the MISO and MOSI lines showing what appears to be "data" ... :)
The W5500 module itself has a power LED which is lit, the 5V is correctly regulating down to 3V3 and the 3V3 pin of the W5500 chipset IC appears to be connected. Both the LEDs on the ethernet balun appears to be turned on and blinking some of the times.
So ... erm ... help? ... what am I doing wrong? What else should I check?
[1]: https://i.sstatic.net/Plitu.png
[2]: https://www.aliexpress.com/item/For-Arduino-W5500-Ethernet-Network-Modules-For-Arduino-TCP-IP-51-STM32-SPI-Interface-3-3V/32673979144.html?spm=2114.search0104.3.9.vIV2jD&ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_10151_10068_10344_10342_10343_10340_10341_10307_10060_10155_10154_10056_10055_10054_10059_10534_10533_10532_100031_10099_10338_10339_10103_10102_10052_10053_10142_10107_10050_10051_10173_10084_10083_10080_10082_10081_10110_10111_10112_10113_10114_10312_10313_10314_10078_10079_10073,searchweb201603_25,ppcSwitch_7&btsid=cb5c75f4-fcc7-424d-bcfe-3b0a40528c80&algo_expid=27f625ee-2770-4ec2-a367-cd7fcec3e2db-1&algo_pvid=27f625ee-2770-4ec2-a367-cd7fcec3e2db
2017-10-08 Update:
Tried Ethernet2 library update from github adafruit ethernet2 libary.
But getting compiling errors now:
Arduino: 1.6.12 (Windows 7), Board: "Arduino/Genuino Micro"
C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Hemon\Documents\Arduino\libraries -fqbn=arduino:avr:micro -vid-pid=0X2341_0X8037 -ide-version=10612 -build-path C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983 -warnings=none -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avrdude.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -verbose Z:\Quantum Sensing Limited\Consulting Work\Arduino\WebServer\WebServer.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Hemon\Documents\Arduino\libraries -fqbn=arduino:avr:micro -vid-pid=0X2341_0X8037 -ide-version=10612 -build-path C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983 -warnings=none -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avrdude.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc.path=C:\Program Files (x86)\Arduino\hardware\tools\avr -verbose Z:\Quantum Sensing Limited\Consulting Work\Arduino\WebServer\WebServer.ino
Using board 'micro' from platform in folder: C:\Program Files (x86)\Arduino\hardware\arduino\avr
Using core 'arduino' from platform in folder: C:\Program Files (x86)\Arduino\hardware\arduino\avr
WARNING: Category 'Device' in library ParPrinter is not valid. Setting to 'Uncategorized'
WARNING: Category 'Device' in library Radar is not valid. Setting to 'Uncategorized'
Detecting libraries used...
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\sketch\WebServer.ino.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\sketch\WebServer.ino.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\sketch\WebServer.ino.cpp" -o "nul"
Using cached library dependencies for file: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src\SPI.cpp
Using cached library dependencies for file: C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Dhcp.cpp
Using cached library dependencies for file: C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Dns.cpp
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet2.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\EthernetClient.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\EthernetServer.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\EthernetUdp.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\EthernetUdp2.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Twitter.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\utility\socket.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\utility\w5100.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\utility\w5200.cpp" -o "nul"
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\utility\w5500.cpp" -o "nul"
Generating function prototypes...
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\sketch\WebServer.ino.cpp" -o "C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\preproc\ctags_target_for_gcc_minus_e.cpp"
"C:\Program Files (x86)\Arduino\tools-builder\ctags\5.8-arduino10/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\preproc\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\sketch\WebServer.ino.cpp" -o "C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\sketch\WebServer.ino.cpp.o"
Compiling libraries...
Compiling library "SPI"
Using previously compiled file: C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\libraries\SPI\SPI.cpp.o
Compiling library "Ethernet"
Using previously compiled file: C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\libraries\Ethernet\Dhcp.cpp.o
Using previously compiled file: C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\libraries\Ethernet\Dns.cpp.o
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -flto -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO=10612 -DARDUINO_AVR_MICRO -DARDUINO_ARCH_AVR -DUSB_VID=0x2341 -DUSB_PID=0x8037 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="Arduino Micro"' "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\micro" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IC:\Program Files (x86)\Arduino\libraries\Ethernet\src" "C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp" -o "C:\Users\Hemon\AppData\Local\Temp\arduino_build_838983\libraries\Ethernet\Ethernet.cpp.o"
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp: In member function 'int EthernetClass::begin()':
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp:26:3: error: 'W5500' was not declared in this scope
W5500.init();
^
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp:37:5: error: 'W5100' was not declared in this scope
W5100.setIPAddress(_dhcp->getLocalIp().raw_address());
^
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp: In member function 'void EthernetClass::begin(IPAddress, IPAddress, IPAddress, IPAddress)':
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp:72:3: error: 'W5100' was not declared in this scope
W5100.init();
^
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp: In member function 'int EthernetClass::maintain()':
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp:158:9: error: 'W5100' was not declared in this scope
W5100.setIPAddress(_dhcp->getLocalIp().raw_address());
^
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp: In member function 'IPAddress EthernetClass::localIP()':
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp:174:3: error: 'W5100' was not declared in this scope
W5100.getIPAddress(ret.raw_address());
^
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp: In member function 'IPAddress EthernetClass::subnetMask()':
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp:181:3: error: 'W5100' was not declared in this scope
W5100.getSubnetMask(ret.raw_address());
^
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp: In member function 'IPAddress EthernetClass::gatewayIP()':
C:\Program Files (x86)\Arduino\libraries\Ethernet\src\Ethernet.cpp:188:3: error: 'W5100' was not declared in this scope
W5100.getGatewayIp(ret.raw_address());
^
Using library SPI at version 1.0 in folder: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI
Using library Ethernet at version 1.0.4 in folder: C:\Program Files (x86)\Arduino\libraries\Ethernet
exit status 1
Error compiling for board Arduino/Genuino Micro.
Invalid version found: 0.1.03
Invalid version found: 0.1.04
Invalid version found: 0.1.06
Invalid version found: 0.1.04
Invalid version found: 0.1.07
Invalid version found: 0.1.02
Invalid version found: 0.1.09
Invalid version found: 0.1.00
Invalid version found: 0.1.05
Invalid version found: 0.1.01
Invalid version found: 0.1.06
Invalid version found: 0.1.01
Invalid version found: 0.1.04
Invalid version found: 0.1.07
Invalid version found: 0.1.04
Invalid version found: 0.1.03
Invalid version found: 0.1.03
Invalid version found: 1.2.03
Invalid version found: 0.1.03
Invalid version found: 0.1.08
Invalid version found: 0.1.04
Invalid version found: 0.1.05
Invalid version found: 0.1.05
Invalid version found: 0.1.00
Invalid version found: 0.1.00
Invalid version found: 0.1.00
Invalid version found: 0.1.00
Invalid version found: 0.1.00
Invalid version found: 0.1.01
Invalid version found: 0.1.09
Invalid version found: 0.1.03
Invalid version found: 0.1.00
Invalid version found: 0.1.00
Invalid version found: 0.1.06
Invalid version found: 0.1.03
Invalid version found: 0.1.04
Invalid version found: 0.1.06
Invalid version found: 0.1.04
Invalid version found: 0.1.07
Invalid version found: 0.1.02
Invalid version found: 0.1.09
Invalid version found: 0.1.00
Invalid version found: 0.1.05
Invalid version found: 0.1.01
Invalid version found: 0.1.06
Invalid version found: 0.1.01
Invalid version found: 0.1.04
Invalid version found: 0.1.07
Invalid version found: 0.1.04
Invalid version found: 0.1.03
Invalid version found: 0.1.03
Invalid version found: 1.2.03
Invalid version found: 0.1.03
Invalid version found: 0.1.08
Invalid version found: 0.1.04
Invalid version found: 0.1.05
Invalid version found: 0.1.05
Invalid version found: 0.1.00
Invalid version found: 0.1.00
Invalid version found: 0.1.00
Invalid version found: 0.1.00
Invalid version found: 0.1.00
Invalid version found: 0.1.01
Invalid version found: 0.1.09
Invalid version found: 0.1.03
Invalid version found: 0.1.00
Invalid version found: 0.1.00
Invalid version found: 0.1.06
Any ideas?