Questions tagged [tcpip]

This should be used when referring to the transmission protocol TCP/IP.

Filter by
Sorted by
Tagged with
3
votes
0answers
30 views

ESP32 HTTP Server request interrupts Telnet session

I have an ESP32 application that uses a web server as a user interface. For auditing and debugging during development I use Serial; however, that is impractical in the installed system. So, I decided ...
2
votes
0answers
44 views

Modbus TCP/IP using Arduino uno and ENC28J60 module

I have this project where I need a modbus tcp server that will host a series of sensor data for other modbus client devices to read. I use this Library by Andresoarmento This is the code i am using ...
1
vote
0answers
47 views

Two SSL connections at the same time on Uno WiFi rev 2

So I want to have one persistent SSL connection to a cloud server (Azure IoT Hub) to upload telemetry and another SSL connection to a server to perform a simple GET request every 30 minutes. I've ...
0
votes
0answers
61 views

TCP client readStringUntil only when data exists

I have the attached script that reads data from a socket server (it is PHP at the server end). My problem (I think) is that the readStringUntil() needs a test above it, so that it "reads up to \r&...
0
votes
1answer
43 views

I can't run shell commands on Linux through AVR sketch (Arduino Yun)

I'm a little confused with some Process.h methods. I'm trying to run the command "nc 192.168.1.15 9911" to the Linux processor through a sketch. The appropriate netcat listener is waiting on ...
0
votes
0answers
165 views

esp8266 WiFiClient Troubleshooting

I have a pair of ESP8266 modules: 1 Server running in (STA+AP mode or AP mode) and 1 client. The client cannot seem to make a TCP connection to the server. Only changing the wifi-networt, HOST, and ...
1
vote
0answers
235 views

Ethernet TCP communication between two arduinos not working

So I've got two arduinos Leonardo ETH, both plugged into a local network I host on my computer, and I'm trying to make them communicate through ethernet. One of my arduinos is collecting data from 2 ...
0
votes
0answers
89 views

Arduino Mega failing to connect to XAMPP database/php server to send HTTP requests

I have developed an application with a SunFounder Mega2560 with a W5100 Ethernet shield that acts as a server and successfully parses TCP message packets from a client sending in updates. I am now ...
1
vote
1answer
651 views

Multiple WiFi client/server connections

I'm implementing a WiFi HTML web server using the WiFiNINA library, an Adafruit Airlift ESP32 coprocessor, and a Teensy 3.5. It's starting to work, but I have a couple of questions. This simplified ...
0
votes
0answers
72 views

Problem with multi-client ASCII text parser (TCP)

I have been having a heck of a time getting my Arduino Uno Rev2 application to work as intended, which is to parse commands from multiple clients sending in ASCII-based commands over WiFi in order to ...
1
vote
2answers
955 views

ESP8266 Webserver not reachable after 2 minutes from reset

I have a Keyes Espressif ESP8266 NodeMCU, I have two LEDs that I want to control which are connected to the ESP. When I open the webpage http://10.0.0.5/5 after uploading the sketch it works fine. If ...
0
votes
1answer
413 views

creating HTTP persistent connection, to create 'smooth' data over GSM sending

Project goals Send data over GSM to firebase Fast sampling - need to send 16 bytes every half second to firebase Send data using GET or POST to server with PHP script, that redirect data to firebase ...
1
vote
0answers
1k views

TCP Communication between PC and multiple arduinos

i am writing a C# program as a server to communicate with two arduinos with ethernet shield acting as clients , intended to humidity and temperature reading . it is working but not as intended it ...
1
vote
0answers
129 views

Can't POST data with Arduino and ESP8266

I'm having problems with my Arduino UNO and the ESP8266 module. I need to send values from Arduino to my PHP web page in this way: http://www.server.com/km/db.php?id=53 the ESP8266 module is working ...
1
vote
0answers
280 views

Arduino Mega with SIM800L running Modbus TCP/IP

I'm trying to set up an Arduino Mega with a SIM800L module and trying to get Modbus TCP running on said Mega. I've set Modbus TCP over wifi and serial before but I used libraries for those. The ...
2
votes
0answers
63 views

Converting Client input char to int

I'm trying to print out the temperature from a DS18B20 sensor to my app via a tpc connection. Because I have two sensors connected I will need to call the one needed by an Index. This index comes from ...
0
votes
1answer
81 views

Forbidden characters in TCP/IP

I'm trying to send data from my ESP8266 to a NodeJS TCP server, the connection and basic charakters (48-90) are working fine, but if I use others like ASCII-Code (0,1,2,3...) I don't get any usefull ...
-1
votes
1answer
72 views

Esp8266-01 AT Commands returns partially

Im trying to get html response from server via esp01 module when using the serial monitor in arduino studio everything works fine here is the serial monitor output AT+CIPSTART="TCP","aaaa.aaaa",...
2
votes
1answer
848 views

Using c_str() on String for IPAddress with NTPClient provides wrong values

Libraries NTPClient Board Olimex ESP32-POE board Behaviour I have written a code that connects the board to a local NTP Server (which is an embedded board). I tried assigning the IP Address of ...
0
votes
1answer
916 views

How to configure TinySine 3G module (SIM5320E) for HTTP GET request

I recently bought a 'TinySine 3G shield (SIM5320E) 900/2100Mhz' based on Adafruit_FONA libraries to use with Arduino Mega 2560 R3. It successfully registered with Vodafone AU. Other functionality ...
1
vote
0answers
630 views

Arduino/ESP8266 - TCP server, connect to AP, receive connections/data

We're trying to use an ESP8266/Arduino Uno as a TCP server, which connects to a wireless AP and then receives commands from other devices on the same network. Currently we got the "connect to AP" part ...
0
votes
1answer
172 views

servers , free domains with ESP [closed]

Lets Say That I Have a routine like: I have written PHP codes for the free domain that will: Wait for request like url/control?ToDo="someMethod",parm=Something (posting some password for ...
-1
votes
1answer
780 views

Multiple #ifndef vs. single one #endif

My question is connected with the issue as linked: Is there any good working MODBUS TCP master library available for Arduino? An example of Modbus TCP master library as suggested in the post above. A ...
0
votes
1answer
1k views

ESP8266 check if TCP client disconnected…informally

Hi with ESP8266WiFi library, I usually check for connection of a TCP client with client.connected(). But it seems to still return true if my TCP client in an unexpected way (like disconnect to WiFi/ ...
3
votes
0answers
3k views

How to listen to multiple server ports with ESP8266?

I'm using WeMos D1 R2. I'm trying to listen to both ports 1992 and 1993. This is my current code: #include WiFiServer server_1992(1992); WiFiServer server_1993(1993); void setup() { Serial....
0
votes
1answer
721 views

ESP8266 cannot create TCP connections to this particular server

EDIT: I have created an issue about this here: https://github.com/esp8266/Arduino/issues/4593 I have this server: 185.205.210.197 (Check that it works: http://185.205.210.197/) And I have this code ...
0
votes
1answer
891 views

How to send MFRC522 data to a C# app using a NodeMCU TCP server?

I am trying to send MFRC522 data to a C# application through a NodeMCU acting as an access point for the C# app. I have modified the code I got from this site. #include ESP8266WiFi.h> #include SPI....
1
vote
2answers
909 views

Communication with socketserver fails after specific number of packets

I'm trying to implement a full-duplex communication between my ESP8266 and a socketserver running on my laptop. In concrete I need each of the devices to initiate communication whenever it needs to. ...
0
votes
1answer
1k views

ERROR on SIM900AT comand HTTPDATA (POST method)

Good day community, I have a project which is VEHICLE GPS Tracker and I'm using Arduino Mega, NEO GPS6MV2 and SIM900. I'm using SIM900 to send the GPS coordinates on a web server. I'm using the POST ...
0
votes
1answer
6k views

ESP8266 send TCP HEX packet with 4 chars

I'm building a remote for my WiFi-RGB Lights. I have an ESP8266, which should send one TCP packet with 4 chars. My code: #include <ESP8266WiFi.h> const char* ssid = "Wifi"; const char* ...
-1
votes
1answer
1k views

How to get the server response when I post to a web api [closed]

I have an arduino which is using a TCPClient to post JSON messages to a web api. First, I have pasted the code below to see if people have general comments about the method I am using to do so. I am ...
1
vote
1answer
214 views

Sending JSON message to web api via post. Why does HTTP 1.0 versus 1.1 make a difference?

I am sending a message to a web api call every xx seconds. I could not get it to work at all until I changed the header from HTTP 1.1 which is what I was using to HTTP 1.0. Then, it started working. ...
1
vote
1answer
205 views

ESP8266 problem with recieved data trasmission via TCP

I am having small project where I want to read couple of analog inputs from Arduino UNO, send it via software serial to ESP8266-01 and from that to python server using TCP. Data is sent to ESP using ...
3
votes
1answer
3k views

Data transmission Serial to TCP

I am trying to send numeric data using ESP8266 to local network python server. Before that I am collecting data from sensors using Arduino UNO and then send it to ESP using hardware serial. ESP8266 ...
2
votes
2answers
8k views

ESP8266 TCP connection WiFiClient issue

I am using ESP8266 01 board to send some data via TCP to server on local network. My code is: #include <ESP8266WiFi.h> const char* ssid = "ssid"; const char* password = "pas"; const char* ...
0
votes
0answers
368 views

How do I send HTTP request using ESP8266 to other port than 80?

I currently have a working connection to my ESP8266 module. However, I can only connect to a server using the port 80, is it possible to choose a different port? I can connect using AT+CIPSTART="TCP"...
2
votes
1answer
9k views

Is there any good working MODBUS TCP master library available for Arduino?

I would like to connect with Fronius solar inverter through MODBUS TCP with Arduino to READ and WRITE register values only. I want to set the Arduino as master and the Inverter as slave. I want to use ...
3
votes
1answer
8k views

How to run TCP socket server on Arduino Uno WiFi?

2017-03-23 update I still don't know why it works so well on Yún. Maybe it has a better antenna? Anyway, I've returned Uno WiFi and got a SparkFun ESP32 Thing. Unfortunately, it has the same problem ...
0
votes
2answers
4k views

How to create TCP server on Arduino UNO WiFi?

I'm currently trying to make my Arduino UNO WiFi work as a TCP host, so I can send him a TCP message and it sends a response. I had no problem doing this on the Arduino Galileo Gen 2 using the ...
1
vote
2answers
802 views

ESP8266 ASyncTCP class example

I am new to ESP programming on Arduino, as before I was developing on eLua. There were some memory problems in Lua, so I decided to move to Arduino. After looking at some examples, I found a library ...
3
votes
4answers
6k views

Scan IP address of ESP8266

I am working on a project in which, the mobile app/browser sends HTTP command to ESP8266 in AP mode. The default IP address of ESP is 192.168.4.1. Therefore in order to connect the ESP to WiFi, the ...
2
votes
2answers
19k views

Multiple client server over wifi

Trying to setup a server on Arduino to support multiple clients, I am able to support one but I don't want to flush that client to make another connection. #include <ESP8266WiFi.h> const char* ...
1
vote
1answer
626 views

Is it possible to print client IP or MAC address from Arduino WiFi web server?

For a school project I want to make a little project with the Arduino Uno. I want to make a project that does something when a client connects to the WiFi shield. My first thought was to print out ...
0
votes
3answers
1k views

How avoid TCP packet fragmentation?

I'm using an Arduino Uno with an Ethernet Shield and the arduino.cc Ethernet library for a custom TCP-based message-exchanging chat-like protocol. Specifically I'm using the Client class with its ...
1
vote
1answer
2k views

Can't connect to my Arduino via W5100 Ethernet shield

I recently bought a W5100 Ethernet shield and I'm trying to run this simple example, which is a little improvement of the basic WebServer sketch provided by Arduino.cc #include <SPI.h> #include ...
0
votes
1answer
822 views

SIM900 TCP Connection issue

I am having a strange issue where if I try and create a TCP connection to my service, it doesn't work. But any other website, such as google, works fine. The serial monitor output is also slightly ...
0
votes
1answer
4k views

Modbus RTU over TCPip

I have developed my arduino code using below library. I tested code working fine over modbus RTU slave. Now i am planning to use RS485 to wifi instead of wire connection. In order to get data over web ...
1
vote
1answer
834 views

ESP2866 and java ServerSocket

So I have an application that runs on the Arduino that passes info over serial. I'm using a ESP2866 to make it wireless. Arduino->Serial->Esp2866->SocketConn->JavaSocket->Console I ...
0
votes
2answers
1k views

Cannot directly connect Arduino Ethernet to PC

I have been following various tutorials (especially: this) to connect an Arduino Ethernet board to my Ubuntu PC via Ethernet directly. The IP address of the computer was found to be 10.100.31.128, ...
2
votes
0answers
117 views

Resend data traffic from an Arduino

I have an Arduino with an Ethernet shield and I want to capture all Ethernet data traffic that connects to the Arduino via [as?] a router. This is because I want to use the Arduino like a honeypot and ...