Questions tagged [isr]

Interrupt Service Routine. A function which gets called in response to an interrupt signal.

Filter by
Sorted by
Tagged with
0
votes
0answers
26 views

#include <stdatomic.h> generates compile errors with no code

Consider the following (non)code example: #include <stdatomic.h> void setup() { // Nowt. } void loop() { // Nowt squared. } This generates compile errors for several lines of code in ...
2
votes
2answers
72 views

Interrupts Within Critical Statements

I've redone a previous Arduino sketch I posted in which I was having trouble capturing encoder counts within critical statements, having no luck properly attaching and detaching interrupts. I've ...
0
votes
1answer
173 views

Arduino ISR timing question

Im trying to understand how the Arduino ISR keeps track of timing between pulses stored in a variable, if that variable is latter used. Say, for example, you have a magnet mounted on a circular ...
0
votes
1answer
31 views

Arduino using delay in I2C receiveEvent

I have read before that you can't use delay() inside I2C receiveEvent because it is an ISR. What I want to do is as follows: I have a servo connected to my Arduino Uno and I want to control that using ...
0
votes
2answers
106 views

Serial Interrupt

I want to create a simple program, that responds to me sending a character over the Arduino IDE console. I am using an arduino UNO. Here is my program: volatile bool MeasReceived=false; ISR(...
0
votes
1answer
32 views

How to bridge free-running multichannel adc to serial?

I want to get meteo sensors values, and turn avr based 16mhz arduino (i have mega, but that seems not matter alot vs uno) into multichannel oscilloscope. Task details. Desired data rate is 8(uno) to ...
1
vote
0answers
50 views

One ISR should be called, but both ISR has been called on Arduino UNO

I experimenting with the interrupt ISR using Arduino Uno. In my circuit, I am taking two mechanical switches that are connected with Uno's interrupt pins, pins 2 and 3, and also taking a built-in LED ...
0
votes
1answer
88 views

Is there a better way to combine if statement with an ISR?

In my sketch when an interrupt gets triggered, a state variable is toggled from high to low and vice versa. Depending upon the variable state I have an if statement in the main loop that will call ...
0
votes
3answers
2k views

Hardware Interrupt Triggered Randomly

So there is this pretty generic part of my project that involves triggering an ISR that will flip a boolean value. I have set up the software side like so: void setup() { attachInterrupt(...
1
vote
1answer
626 views

Volatile variable not updating from timer ISR

I know this is a problem that has come up many times but I can't seem to get this code fragment to update the count variable on an ATMEGA328P. I am using an Arduino Uno as a development board, with ...
0
votes
1answer
109 views

Arduino IDE with ATtiny85 error “multiple definition of `__vector_5”

I am having a problem compiling the code for my ATtiny85 circuit. I am using the timer/counter0 in normal mode so that when it overflows it triggers the TIMER0_OVF_vect ISR. When I have that ISR in ...
0
votes
2answers
59 views

buiReliable time in ISR

I'm using a Nano. The code below is a simplified workup of my problem code. The point of it is asynchronous debounced button press detection. The actual code sets a volatile bool to tell the main ...
0
votes
1answer
303 views

real-time reading of a quadrature encoder at full resolution with only one interrupt on ATmega328

I want to read a quadrature rotary encoders at full resolution with only one interrupt on Arduino Nano (ATmega328). So I found out that we can use XOR to reach a full resolution: Where pin 3 ...
0
votes
2answers
26 views

Is volatile qualifier needed if shared variable cannot be changed externally during complete function call?

Consider the following example: int i { 0 }; void incInt() { ++i; } int readInt() { return i; } setup() { Serial.begin(9600); attachInterrupt(digitalPinToInterrupt(D1), incInt, ...
0
votes
0answers
111 views

Flow meter using Wemos Mini - ISR not in IRAM!

I'm trying to use a flow meter with Wemos Mini. Most tutorials are using Arduino boards ( which code and HW work OK ), but since I want this device to send alerts over the internet when abnormal usage/...
0
votes
2answers
554 views

how to interrupt the loop function and restart it?

I have a project with some NeoPixels and other LEDs and an Arduino UNO. Once switched on, the defaultLEDAnimation with colors and blinking, etc. starts. I want to trigger some other animations, so I ...
1
vote
1answer
239 views

What is the call to cli(); routine in interrupt service routine for SPI?

I see this in examples of ISR code but what is it?
1
vote
0answers
885 views

Does Proteus simulate external interrupts properly using Arduino? I can't get them to work

I am trying to simulate an interrupt with an Arduino Uno in Proteus. This is the simple test code that I'm using: void introutine() { digitalWrite(13,HIGH); } void setup() { pinMode(13,OUTPUT); ...
3
votes
3answers
1k views

What is the right way to query an I2C device from an interrupt service routine?

The ADXL345, for example, requires that interrupts are responded to by querying the INT_SOURCE (interrupt source) register. In example code for the SparkFun ADXL345 Arduino Library, there is code that ...
1
vote
1answer
72 views

Arduino Timer0 Piggyback

As described here https://learn.adafruit.com/multi-tasking-the-arduino-part-2/timers I use timer 0 to get my own timer with a milliseconds resolution. It is setup like this: void setup (void) { ...
0
votes
1answer
30 views

ISR definition causing boot loop?

I am trying to compile and upload code to an Arduino Uno from the command-line, however I seem to be experiencing an odd issue. When I compile this code: #include <avr/interrupt.h> #include &...
1
vote
1answer
408 views

AttachInterrupt - fail to initiate inside a class [duplicate]

I'm trying to create a class that uses attachInterrupt, but get this error msg: In member function 'void ledDoor::attach()': ClosetLedStrip:31:82: error: invalid use of non-static member function ...
1
vote
0answers
41 views

can an ISR change the value passed by pointer while the subroutine is executing?

So I am working on a project where the board plays a song on a buzzer using PWM and I want the song to stop when i press an external button typedef enum stateType_enum{ waitPress, debouncePress, ...
1
vote
3answers
355 views

Arduino delay inside of an Interrupt

Using the delay function inside of an ISR is frowned upon when programming in an Arduino. The general response to solve this desire is to design the program to delay in a more cleanly way outside of ...
-1
votes
1answer
78 views

Does this sound like a good approach to decoding a dumb keypad?

The background: I bought a "dumb" 8-pin 4x4 keypad for use in a project. (This one: https://www.sparkfun.com/products/14881 It has a wire connected to each row, and a wire connected to each column. ...
8
votes
2answers
4k views

Arduino interruption (on pin change)

I use the interrupt function to fill an array with values received from digitalRead(). void setup() { Serial.begin(115200); attachInterrupt(0, test_func, CHANGE); } void ...
4
votes
2answers
406 views

Interrupts: use of the “volatile” keyword with a structure pointer for button debounce

I've written a small sketch targeted at the Arduino Uno (ATmega328P) to debounce a mechanical pushbutton using the summing/integration technique: #include <IntegratingDebounce.h> #define ...
0
votes
1answer
189 views

How to stop sending the last received char of UART echo function?

I developed a code for uart based ISR with linear buffers, the problem is that it keep sending the last received char in Arduino IDE. Here's the application code: #include "uart_new.h" void setup() ...
0
votes
1answer
142 views

attiny85: ISR not triggering for PCINT2?

I am using an attiny85 to read the fan speed reported by a pair of 4-wire fans. I had planned to attach the TACH output from the fans to pins 1 and 2, but I ran into a problem: I was able to handle ...
2
votes
2answers
455 views

ISR executes twice if data coming through SoftwareSerial

I am using Arduino Pro Mini to get GPS info from a u-blox NEO-M8N chip and display it on a Adafruit OLED display. NEO-M8N has a PPS(pulse per second) output which is aligned to GPS's second. Because ...
0
votes
1answer
5k views

Problem on multiple interrupts operation on Arduino Uno

I experimenting with the interrupt ISR using Arduino Uno. In my circuit, I am taking two switches which are connected with Uno's interrupt pins, pins 2 and 3, and also taking multiple LEDs which are ...
1
vote
2answers
682 views

ISR vs state change detection on button

Hi I was wondering if a digitalRead state change detection could be saved in a variable like counter++, just like you can do with an interrupt function. arent these two operations almost the same? ...
2
votes
2answers
2k views

How do I use interrupt service routines inside libraries and classes?

I'm trying to have a millis() timer run to emulate a hardware timer inside a library, but I'm having issues compiling the code. I want the callback (pseudo ISR) to be part of the class, and not use ...
1
vote
3answers
926 views

Custom ISR triggering function/value

Is there a way to write a custom function which would be the mode/reason to trigger an interrupt. I have an analog joystick connected to my arduino analog pin. It reads a value of 689 on one end and 0 ...
0
votes
2answers
434 views

Difference between ISR and other functions in AVR twi library

I was studying the ISR for twi and I want to know how is it working. I have two questions about the code handling for ISR and the other functions and what they do exactly: My first question is about ...
0
votes
1answer
32 views

Is it possible to HTTP inside an ISR

I am developing a 247 monitoring system with Arduino. The values need to be sent to server periodically as well as upon interrupt (Watchdog). To access the internet, I am using the SIM800 module. Now, ...
0
votes
1answer
2k views

Soft debouncing from an interrupt during stand-by

My current setup has the arduino in 'stand-by' power saving mode, therefore i am unable to use any means of a traditional soft debouncer, such as Bounce2, as far as I know. I went ahead and attached ...
2
votes
6answers
5k views

Is possible to set a pin faster than digitalWrite?

I am currently using arduino library to logically set my digital pins high or low, but I just realized how slowly it actually sets those pins, which is especially problem as i am doing this in a ISR ...
2
votes
2answers
5k views

ATmega328p hangs on USART RX interrupt

I was able to use USART without interrupt driven and it worked perfectly! However, when I tried adding interrupt on USART_RX_vect, the program does not work as expected anymore. Below is my small ...
0
votes
1answer
85 views

Can't operate relay's functionality in ISR function - SOLVED

In recent project, I have to operate my relay based on falling edge of Square wave. Here, falling edge detect by using interrupt. So, whenever Arduino detect falling edge using interrupt, ISR function ...
0
votes
2answers
657 views

ISR and multiplexing- time required to execute the code in Arduino

Below is an Arduino sketch for a basic animation, taken from the book Beginning Arduino by Michael McRoberts. Also, the connections have been shown. From what I have read elsewhere, this is the ...
1
vote
1answer
562 views

Arduino (weird) ADC problem

I'm trying to read to voltage output of module ACS712. Here is my problem: The module outputs a voltage around 2.5V, however, arduino sends the value "1023" to the PC. (Gives a reading of 5V). ...
0
votes
1answer
149 views

Software PWM implementation on ATTiny44 screws up timing functions

I've came up with a poor man's implementation of software-based PWM for the ATTINY44 and I'm kinda stuck now. It works but it screws up the timing functions badly (delay, delayMicroseconds) no matter ...
1
vote
2answers
2k views

How time intensive or how long can an ISR be?

I would like to code my ISR to be time intensive or interrupt the main program for atleast 1 or more seconds. My goal is to verify that if I am reading a sensor in the main loop, would it stop reading ...
11
votes
2answers
964 views

Are function pointer assignments atomic in Arduino?

The following snippets are from TimerOne library source code: // TimerOne.h: void (*isrCallback)(); // TimerOne.cpp: ISR(TIMER1_OVF_vect) // interrupt service routine that wraps a user defined ...
-1
votes
1answer
530 views

Arduino Due interrupt is taken but not executed completely

I tried to build a simple l-meter with my arduino due. I programmed a simple frequency meter with one timer and one counter. The timer takes an interrupt each 10s, 100ms, 10ms and 1ms. But ones the ...
0
votes
4answers
11k views

How to set up one second interrupt/ISR for ds3231 RTC

I am able to set up one hz interrupts using millis and other timers, but would like to do it instead using the RTC I have attached (DS3231) I am not sure how I can do that. Can someone point me to a ...
4
votes
3answers
207 views

why does function affect my ISR?

I am currently running this piece of code: main.ino #include "speed_profile.h" void setup() { // put your setup code here, to run once: output_pin_setup(); cli(); timer1_setup(); sei(); } ...
0
votes
1answer
79 views

Do ISRs have to be defined in top level Arduino program?

I'm currently attempting to implement some interrupts on an Arduino project. Looking through some of the examples, it appears that all the ISRs are defined in the top level Arduino program. I'm ...
1
vote
1answer
199 views

Having trouble using RTC if I set an ISR for a 1 second timer

I built a sketch using some timer ISR code to get a trigger every second. (for the Atmega328 chip I use the following code I got form the internets. It works) It runs fine and I get a trigger/...