Questions tagged [compile]
To compile is to convert the code for a sketch into machine readable files that are uploaded to the Arduino. This tag is mostly used for the space and footprint of the files uploaded to the Arduino.
153
questions
0
votes
1
answer
50
views
The Arduino copy of example code for tone() function produces a compile error: 'tone' is not declared in this scope. How can I fix this?
It's 32-bit ARM core processor is SAM3X8E ARM Cortex-M3 CPU.
Error:
sketch_nov16b\sketch_nov16b.ino: In function 'void setup()': sketch_nov16b:49:43: error: 'tone' was not declared in this scope tone(...
- 11
2
votes
1
answer
238
views
How to find out all #define used by arduino-cli in compile?
How to find out all #define used by arduino-cli in compile?
I had seen something some time ago, but I cannot find it again. I think that it was some option somewhere, and the result was that the ...
- 1,410
4
votes
3
answers
510
views
How to compile without adding the bootloader?
I'm using a standalone atmega328p with a 16MHz crystal.
I'm programming it via avrdude on a raspberry pi, using the SPI and RESET pins.
When I compile my program, this is what I see at the end of the ...
- 213
1
vote
0
answers
22
views
Sketch does not run right when uploaded via Arduino IDE vs PlatfomIO
I try to upload Adafruit's example sketch (Wemos mini 8266 + Lolin TFT-2.4" touch screen).
When complied and uploaded via Arduino IDE v1.8.19, sketch runs OK (including TFT), but when uploading ...
- 993
2
votes
5
answers
165
views
Break a big file into smaller files
I had a really big .ino file and I decided to break it down into sub-files.
So I had the .ino file, the globals.h file and the functions.h file.
I moved all the global vars and functions to their ...
- 1,385
5
votes
1
answer
707
views
Library not found when using the arduino-cli command (although working with the Arduino IDE)
I have a sketch which I can upload without problem with the Arduino IDE. I installed the arduino-cli Version: 0.28.0 Commit: 06fb1909 Date: 2022-10-18T15:53:04Z. I want to compile and upload a code ...
- 165
0
votes
1
answer
627
views
"previous declaration of 'HTTPMethod HTTP_HEAD'"
I'm getting the following error when I try to compile my code on my LOLIN(WeMos) D1 R1:
In file included from C:\Users\Administrator\Documents\Arduino\libraries\WiFiManager/WiFiManager.h:17,
...
- 97
4
votes
2
answers
323
views
How to cut down size of imported DigiKeyboard library
I'm working on a project with a Digispark ATTiny85, that performs keystrokes using the DigisparkKeyboard library (https://github.com/digistump/DigisparkArduinoIntegration/tree/master/libraries/...
- 105
0
votes
0
answers
126
views
Disable USB support for mega32u4
I have a custom Leonardo board (mega32u4-based) that does not use at all the USB features.
When I build my sketch (vscode and platformio) I read:
Compiling .pio/build/leonardo/FrameworkArduino/CDC.cpp....
- 357
2
votes
2
answers
212
views
How to install the application + its configuration to many devices of the same kind? (ESP32)
Being the newbie in the Arduino area... Having more devices, how can I upload some configuration parameters after the code was uploaded? Is it possible?
Situation: I have the simple application for ...
- 147
1
vote
0
answers
100
views
Error compiling arduino sketch to seeduino xiao for RF24 Module
I am trying to get 2 rf24 modules talking to each other. This is my first real arduino project so bear with my ignorance please. I could get them to work with 2 arduino nano but, when trying to ...
- 11
0
votes
1
answer
2k
views
Random "Compilation error: Error: 13 INTERNAL: exit status 1". No clue how to resolve or even what causes this error
I am a beginner with Arduino. I have a program that is intentionally simple.
The code refuses to compile, spitting out the error Compilation error: Error: 13 INTERNAL: exit status 1. I have gotten ...
- 11
0
votes
4
answers
874
views
What should I do with stackOverflow in compile error?
I don't have port, but when I want to compile my code (even empty files),
I encounter this error:
Sketch uses 444 bytes (1%) of program storage space. Maximum is 32256 bytes.
Global variables use 9 ...
- 9
2
votes
1
answer
144
views
Conditional compilation depending on sizeof(double)
Is there a macro (#define ...) somewhere in the bowels of Arduino IDE or core header files which tells me at compile time(!), if the double data type for a given platform/board is a true double ...
- 123
1
vote
1
answer
290
views
Program size optimization
I am trying to spare a few bytes of program size.
I faced a problem which I cannot understand and I hope somebody will help.
Look at this empty sketch, pleas. It takes just 444 bytes:
void setup()
{
}
...
- 439
1
vote
0
answers
57
views
Fresh install getting Assembler Error
I am using Raspberry Pi 4 to connect via usb to program ardino Nano, I intend to communicate with the nano via i2c, but this is irrelivant.
With a fresh install of Arduino for ARM 32 bit I get this ...
- 11
5
votes
3
answers
2k
views
Using Arduino as a standalone compiler
I mostly program in C/C++ so I conviniently have a GCC compiler for all my compilations. I was wondering if there is a special compiler for Arduino that can be used just like the GCC Compiler? Because ...
1
vote
0
answers
81
views
How to compile Arduino Framework with GNU
I'm wondering if it's possible to use GNU (g++) to compile a arduino Sketch.
I wanna be able to unit test my code with catch2.
g++ -std=c++11 <filename> works well with catch2, but I obviously ...
1
vote
0
answers
94
views
Trying to show g++ (linter-gcc for Atom) where to find Arduino libs
I'm trying to use Atom as an IDE for arduino and arduino-based boards.
I'm using arduino-cli for compilation and avrdude for upload, and now I'm trying to use linter-gcc for linting.
g++ is running ...
1
vote
1
answer
67
views
Changes to user included library
I've been putting a small helper library together which I'm just including manually via the libraries sub-directory. I've just made some changes to the library in the filesystem however when trying to ...
- 111
1
vote
2
answers
92
views
Gratuitious instantiation of `Serial`, why?
Let's take a very simple sketch, any simple one-.ino sketch. Say, just a led blinker like this
void setup()
{
pinMode(LED_BUILTIN, OUTPUT);
digitalWrite(LED_BUILTIN, LOW);
}
void loop()
{
...
0
votes
1
answer
3k
views
ESP32 on Arduino IDE: Identify the board type in code (preprocessor macro)
I have read the answers on this post, but they do not seem to be providing a solution for ESP32 boards.
Is there a way to get the .name that is used from the boards.txt without modifying the platform....
1
vote
2
answers
102
views
Runtime compilation
I want to compile a sketch on Arduino Uno, while Arduino is running and not connected to anything else, and then run the compiled sketch automatically.
Is this feasible?
How?
- 11
1
vote
0
answers
612
views
Error compile board LOLIN(WEMOS) D1 R2 & mini
I have a wemos d1 mini and a mpu 6060 sensor. I am trying to send the data from the sensor to Firebase. However i have come across a hurdle which i cant seem to solve. This is my error, can you help ...
- 21
1
vote
0
answers
204
views
Compile error with Arduino tensorflow lite library
I was reading the article about tensorflow lite on SAMD51 here and tried it and failed to compile.
It was the example from the arduino tensorflow lite lirabry and doesnt seem to compile.
Selected ...
- 11
2
votes
0
answers
175
views
Arduino uno wifi rev2 error compiling sketch to board [duplicate]
I'm having an irritating situation with my Arduino Uno wifi rev2 board.
I made an installation with an LCD, keypad and little servo motor. I first wrote the code for my regular Arduino Uno and ...
- 161
1
vote
1
answer
262
views
Arduino Nano/Uno and js sketch compiling/uploading from browser
I need to compile generated source code in js runtime then upload it to my device.
Compiling:
I have found arduino-cli
Uploading:
There is only avrgirl but it doesn't work in browser. What should ...
- 111
1
vote
0
answers
699
views
Having problems compiling this code for NRF24l01 on stm8s103f3p6
It said it has mutiple libraries were found for "nRF24L01.h"
but i check the Ardurino libraries I can only found one.
And it work fine if I compile it to Arduino uno.
//Include Libraries
#include <...
- 11
1
vote
0
answers
80
views
Error Compiling any coding in Arduino IDE
I was using the example code of "Blink", and when I try to compile it, it pop out an error as below.
I tried to:
uninstall and installed back the Arduino IDE
installed different versions of Arduino ...
- 11
1
vote
1
answer
486
views
How to delegate code compilation to a remote machine?
Sometime I write Arduino code on a slow Windows laptop that I use for controlling hardware projects and 3D printing.
My main Windows computer and also my Linux home server are located somewhere else ...
- 339
0
votes
1
answer
38
views
What is the difference between Tools > Board settings in Arduino IDE? ex: ESP32-Dev v. Huzzah32
I had a recent memory issue where the resolution was to change the Tools > Partition setting. However this setting wasn't available in the Arduino IDE for the boards I was using (Huzzah32 and NodeMCU-...
- 51
0
votes
2
answers
159
views
Compile error in Ubuntu 18.04
I'm trying to compile a code to arudino pro micro, I have the right option for compiling like the port and the type of the board,but I get an error,I can't copy
- 3
0
votes
2
answers
54
views
Project wont compile when I place functions below function calls [closed]
I use VSCode, not the Arduino IDE. I saw and tried to use a lot of code snippets which are provided for Arduino projects...
So when I copy/paste these examples into my VSCode and try to compile it ...
- 103
1
vote
0
answers
594
views
code error- Real Time Clock program-DS3231 RTC module
I'am a NEW-B with an ELEGOO mega 2560 starter kit.The program code came from their disc.The verifying error message for the declaration: RTCDateTime dt; is
RTCDateTime' does mot name a type
exit ...
0
votes
1
answer
200
views
How to Compile Different Sketches in Different Visual Studio Code Workspaces
I'm using Visual Studio Code with the Arduino extension. I have two workspaces each with a different sketch file loaded - Sketch_1 and Sketch_2. Sketch_1 will verify and upload properly. When I click ...
- 1
1
vote
0
answers
60
views
Combining sketches
I have two codes for my to sensors and they work separately. However, I need to combine them in one program please can you help?
The pulse code
/* PulseSensor Starter Project and Signal Tester
* ...
- 11
1
vote
0
answers
169
views
Eclipse "CDT Core Builder" error
I installed an Eclipse Version: 2018-12 (4.10.0) for Arduino.
I’ve got an CDT Core Builder error when I try to compile.
I’ve searched but cannot fix the problem.
- 11
1
vote
1
answer
2k
views
Multiple definition error when linking firmware.elf
I just can't wrap my head around on how to properly work with multiple files. My code has been getting quite big so I decided to split all the classes into one file each. So I'm left with 6 files:
...
- 154
1
vote
0
answers
311
views
Why does the program size increase so drastically with these switch-cases?
EDIT: The problem is my op-code catch is op >= 0x20 || op <= 0x2F rather than op >= 0x20 && op <= 0x2F and so most of the switch-case was being optimised away!
This is a really ...
- 111
5
votes
1
answer
969
views
How can I have code in a project that won't compile for Arduino?
I want to test the algorithms in my code without needing to send it to an actual Arduino board. I figured I could lay out my project like:
project/
core.cpp # core algorithms
core.h ...
- 163
0
votes
1
answer
4k
views
'dynamic_cast' not permitted with -fno-rtti
class A {
virtual ~A();
}
class B : public A {
public:
int foo;
}
void bar(A *foo_){
B* b = dynamic_cast<B*>(foo_);
if(b != nullptr){
cout << (*foo_)->...
- 157
1
vote
2
answers
1k
views
How do I make Arduino IDE use a specific version of GCC in Debian?
Using Raspbian Stretch.
I installed gcc-4.9 with specified version. Then I installed arduino (2.1.0.5) which in turn pulled gcc 4.6. When I try to compile Marlin in it, it says
Marlin requires C++...
- 131
2
votes
0
answers
734
views
Prevent Arduino IDE from rebuilding the core library after every restart
I have an Arduino IDE 1.8.5 setup (installed from the ZIP file) which I use to work exclusively with a single board. Every time the IDE is restarted, the first compilation takes much longer than ...
- 1,278
0
votes
1
answer
335
views
Headers linking - PlatformIO
For those who use the IDE Platform IO, I have an issue for you. I use to program a home application of sensor reading and use the library "JC_Button.h" to manage buttons. There are other third-party ...
- 157
1
vote
1
answer
63
views
Changing type of one variable dramatically changes compile size
I have a sketch containing the following method:
// Writes zeros to the complete screen clearing it:
void clearScreen(uint8_t val) {
setDrawArea(0x00, 0x7f, 0x00, 0x07); // complete screen
...
- 115
1
vote
1
answer
315
views
Cannot load anything from library
So I installed libraries through the Arduino interface (Sketch > Include Library > Manage Library). Then I check: C:\Users\username\OneDrive\Documents\Arduino\Libraries, and I confirm the new ...
- 113
2
votes
0
answers
2k
views
ESP8266 can't read parasitic DS18B20 temperature (reset during conversion, 85°C)
tl;dr at the end
I was running two DS18B20+PAR temperature sensors without any problems for the last two years on an ESP-01 module running on 3.3V on GPIO 2 using a 4.7K pullup resistor.
Now, ...
- 21
1
vote
1
answer
1k
views
Compiling with -flto and -nostartfiles results in no program at all
Towards developing my own bootloader I've stumbled over an issue with avr-gcc. I am trying to compile my code with the compiler flags
-flto #to enable link time optimization
-nostartfiles #...
- 1,513
2
votes
2
answers
422
views
Purposely create compile error to fail the upload [closed]
I would like to create a compile error so sketch does not upload in certain cases.
I have written a library with a function that adds pins being used to an array. If the same pin is used twice I ...
- 141
1
vote
1
answer
1k
views
Segmentation fault at Serial.begin()
I try to communicate with my Arduino clone (Elegoo Uno R3) from Arduino IDE (v1.8.4 installed by dnf from repos) at Fedora 27. Compiling and upload of normal example code works well. However, as I try ...
- 11