I have a working project built around ATTiny85 on a breadboard running at 5V. Now I want to move this prototype on a PCB where it will be powered from batteries. All components used are capable of running 3.3V so I want to run the ATTiny85 at 3.3V as well.
I don't have a programmer so I use ArduinoISP to program the ATTiny. If I change the fuses on Tiny to run it at 3.3V can I still use the 5V Arduino to program the tiny?
Since the ATTiny can easily run at 5V I don't see any problem with programming it at 5V levels and then run it at 3.3V. Is that correct?