1

I am trying to get 2 rf24 modules talking to each other. This is my first real arduino project so bear with my ignorance please. I could get them to work with 2 arduino nano but, when trying to upload the same sketch to a seeduino xiao it won't compile. Not sure how to format this better (please intstruct) sorry<-- Here is a copy of the error message:

Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "Seeeduino XIAO, Arduino, On"

In file included from C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:9:0:

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/adc.h:684:34: note: in expansion of macro 'STATUS'

   __I  ADC_STATUS_Type           STATUS;      /**< \brief Offset: 0x19 (R/   8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/dac.h:277:34: note: in expansion of macro 'STATUS'

   __I  DAC_STATUS_Type           STATUS;      /**< \brief Offset: 0x7 (R/   8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/eic.h:667:34: note: in expansion of macro 'STATUS'

   __I  EIC_STATUS_Type           STATUS;      /**< \brief Offset: 0x01 (R/   8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:26:21: error: expected unqualified-id before numeric constant

 #define CONFIG      0x00

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/eic.h:675:34: note: in expansion of macro 'CONFIG'

   __IO EIC_CONFIG_Type           CONFIG[2];   /**< \brief Offset: 0x18 (R/W 32) Configuration n */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/gclk.h:301:34: note: in expansion of macro 'STATUS'

   __I  GCLK_STATUS_Type          STATUS;      /**< \brief Offset: 0x1 (R/   8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/nvmctrl.h:346:34: note: in expansion of macro 'STATUS'

   __IO NVMCTRL_STATUS_Type       STATUS;      /**< \brief Offset: 0x18 (R/W 16) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/rtc.h:1000:34: note: in expansion of macro 'STATUS'

   __IO RTC_STATUS_Type           STATUS;      /**< \brief Offset: 0x0A (R/W  8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/rtc.h:1020:34: note: in expansion of macro 'STATUS'

   __IO RTC_STATUS_Type           STATUS;      /**< \brief Offset: 0x0A (R/W  8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/rtc.h:1042:34: note: in expansion of macro 'STATUS'

   __IO RTC_STATUS_Type           STATUS;      /**< \brief Offset: 0x0A (R/W  8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/sercom.h:1419:34: note: in expansion of macro 'STATUS'

   __IO SERCOM_I2CM_STATUS_Type   STATUS;      /**< \brief Offset: 0x1A (R/W 16) I2CM Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/sercom.h:1441:34: note: in expansion of macro 'STATUS'

   __IO SERCOM_I2CS_STATUS_Type   STATUS;      /**< \brief Offset: 0x1A (R/W 16) I2CS Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/sercom.h:1463:34: note: in expansion of macro 'STATUS'

   __IO SERCOM_SPI_STATUS_Type    STATUS;      /**< \brief Offset: 0x1A (R/W 16) SPI Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/sercom.h:1488:34: note: in expansion of macro 'STATUS'

   __IO SERCOM_USART_STATUS_Type  STATUS;      /**< \brief Offset: 0x1A (R/W 16) USART Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/tc.h:621:34: note: in expansion of macro 'STATUS'

   __I  TC_STATUS_Type            STATUS;      /**< \brief Offset: 0x0F (R/   8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/tc.h:645:34: note: in expansion of macro 'STATUS'

   __I  TC_STATUS_Type            STATUS;      /**< \brief Offset: 0x0F (R/   8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/tc.h:667:34: note: in expansion of macro 'STATUS'

   __I  TC_STATUS_Type            STATUS;      /**< \brief Offset: 0x0F (R/   8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/tcc.h:253:14: note: in expansion of macro 'STATUS'

     uint32_t STATUS:1;         /*!< bit:      3  Status Busy                        */

              ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/tcc.h:1799:34: note: in expansion of macro 'STATUS'

   __IO TCC_STATUS_Type           STATUS;      /**< \brief Offset: 0x30 (R/W 32) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/usb.h:1728:34: note: in expansion of macro 'STATUS'

   __I  USB_DEVICE_STATUS_Type    STATUS;      /**< \brief Offset: 0x00C (R/   8) DEVICE Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/usb.h:1759:34: note: in expansion of macro 'STATUS'

   __IO USB_HOST_STATUS_Type      STATUS;      /**< \brief Offset: 0x00C (R/W  8) HOST Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:26:21: error: expected unqualified-id before numeric constant

 #define CONFIG      0x00

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/wdt.h:290:34: note: in expansion of macro 'CONFIG'

   __IO WDT_CONFIG_Type           CONFIG;      /**< \brief Offset: 0x1 (R/W  8) Configuration */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\nRF24L01.h:33:21: error: expected unqualified-id before numeric constant

 #define STATUS      0x07

                     ^

C:\Users\User\Documents\ArduinoData\packages\Seeeduino\tools\CMSIS-Atmel\1.2.1/CMSIS-Atmel/CMSIS/Device/ATMEL/samd21/include/component/wdt.h:296:34: note: in expansion of macro 'STATUS'

   __I  WDT_STATUS_Type           STATUS;      /**< \brief Offset: 0x7 (R/   8) Status */

                                  ^~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::print_status(uint8_t)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:188:22: error: '_BV' was not declared in this scope

            (status & _BV(RX_DR))?1:0,

                      ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:188:22: note: suggested alternative: '_B'

            (status & _BV(RX_DR))?1:0,

                      ^~~

                      _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:186:3: error: 'printf_P' was not declared in this scope

   printf_P(PSTR("STATUS\t\t = 0x%02x RX_DR=%x TX_DS=%x MAX_RT=%x RX_P_NO=%x TX_FULL=%x\r\n"),

   ^~~~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:186:3: note: suggested alternative: 'sprintf_P'

   printf_P(PSTR("STATUS\t\t = 0x%02x RX_DR=%x TX_DS=%x MAX_RT=%x RX_P_NO=%x TX_FULL=%x\r\n"),

   ^~~~~~~~

   sprintf_P

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::print_observe_tx(uint8_t)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:200:3: error: 'printf_P' was not declared in this scope

   printf_P(PSTR("OBSERVE_TX=%02x: POLS_CNT=%x ARC_CNT=%x\r\n"),

   ^~~~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:200:3: note: suggested alternative: 'sprintf_P'

   printf_P(PSTR("OBSERVE_TX=%02x: POLS_CNT=%x ARC_CNT=%x\r\n"),

   ^~~~~~~~

   sprintf_P

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::print_byte_register(const char*, uint8_t, uint8_t)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:212:3: error: 'printf_P' was not declared in this scope

   printf_P(PSTR(PRIPSTR"\t%c ="),name,extra_tab);

   ^~~~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:212:3: note: suggested alternative: 'sprintf_P'

   printf_P(PSTR(PRIPSTR"\t%c ="),name,extra_tab);

   ^~~~~~~~

   sprintf_P

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::print_address_register(const char*, uint8_t, uint8_t)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:223:3: error: 'printf_P' was not declared in this scope

   printf_P(PSTR(PRIPSTR"\t%c ="),name,extra_tab);

   ^~~~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:223:3: note: suggested alternative: 'sprintf_P'

   printf_P(PSTR(PRIPSTR"\t%c ="),name,extra_tab);

   ^~~~~~~~

   sprintf_P

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::printDetails()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:325:3: error: 'printf_P' was not declared in this scope

   printf_P(PSTR("Data Rate\t = %S\r\n"),pgm_read_word(&rf24_datarate_e_str_P[getDataRate()]));

   ^~~~~~~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:325:3: note: suggested alternative: 'sprintf_P'

   printf_P(PSTR("Data Rate\t = %S\r\n"),pgm_read_word(&rf24_datarate_e_str_P[getDataRate()]));

   ^~~~~~~~

   sprintf_P

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::begin()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:382:25: error: '_BV' was not declared in this scope

   write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) );

                         ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:382:25: note: suggested alternative: '_B'

   write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) );

                         ^~~

                         _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::startListening()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:398:50: error: '_BV' was not declared in this scope

   write_register(CONFIG, read_register(CONFIG) | _BV(PWR_UP) | _BV(PRIM_RX));

                                                  ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:398:50: note: suggested alternative: '_B'

   write_register(CONFIG, read_register(CONFIG) | _BV(PWR_UP) | _BV(PRIM_RX));

                                                  ^~~

                                                  _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::powerDown()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:429:50: error: '_BV' was not declared in this scope

   write_register(CONFIG,read_register(CONFIG) & ~_BV(PWR_UP));

                                                  ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:429:50: note: suggested alternative: '_B'

   write_register(CONFIG,read_register(CONFIG) & ~_BV(PWR_UP));

                                                  ^~~

                                                  _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::powerUp()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:436:49: error: '_BV' was not declared in this scope

   write_register(CONFIG,read_register(CONFIG) | _BV(PWR_UP));

                                                 ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:436:49: note: suggested alternative: '_B'

   write_register(CONFIG,read_register(CONFIG) | _BV(PWR_UP));

                                                 ^~~

                                                 _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'bool RF24::write(const void*, uint8_t)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:468:25: error: '_BV' was not declared in this scope

   while( ! ( status & ( _BV(TX_DS) | _BV(MAX_RT) ) ) && ( millis() - sent_at < timeout ) );

                         ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:468:25: note: suggested alternative: '_B'

   while( ! ( status & ( _BV(TX_DS) | _BV(MAX_RT) ) ) && ( millis() - sent_at < timeout ) );

                         ^~~

                         _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::startWrite(const void*, uint8_t)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:510:52: error: '_BV' was not declared in this scope

   write_register(CONFIG, ( read_register(CONFIG) | _BV(PWR_UP) ) & ~_BV(PRIM_RX) );

                                                    ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:510:52: note: suggested alternative: '_B'

   write_register(CONFIG, ( read_register(CONFIG) | _BV(PWR_UP) ) & ~_BV(PRIM_RX) );

                                                    ^~~

                                                    _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'bool RF24::available(uint8_t*)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:552:28: error: '_BV' was not declared in this scope

   bool result = ( status & _BV(RX_DR) );

                            ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:552:28: note: suggested alternative: '_B'

   bool result = ( status & _BV(RX_DR) );

                            ^~~

                            _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'bool RF24::read(void*, uint8_t)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:585:39: error: '_BV' was not declared in this scope

   return read_register(FIFO_STATUS) & _BV(RX_EMPTY);

                                       ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:585:39: note: suggested alternative: '_B'

   return read_register(FIFO_STATUS) & _BV(RX_EMPTY);

                                       ^~~

                                       _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::whatHappened(bool&, bool&, bool&)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:594:42: error: '_BV' was not declared in this scope

   uint8_t status = write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) );

                                          ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:594:42: note: suggested alternative: '_B'

   uint8_t status = write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) );

                                          ^~~

                                          _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::openReadingPipe(uint8_t, uint64_t)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:652:57: error: '_BV' was not declared in this scope

     write_register(EN_RXADDR,read_register(EN_RXADDR) | _BV(pgm_read_byte(&child_pipe_enable[child])));

                                                         ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:652:57: note: suggested alternative: '_B'

     write_register(EN_RXADDR,read_register(EN_RXADDR) | _BV(pgm_read_byte(&child_pipe_enable[child])));

                                                         ^~~

                                                         _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::enableDynamicPayloads()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:671:51: error: '_BV' was not declared in this scope

   write_register(FEATURE,read_register(FEATURE) | _BV(EN_DPL) );

                                                   ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:671:51: note: suggested alternative: '_B'

   write_register(FEATURE,read_register(FEATURE) | _BV(EN_DPL) );

                                                   ^~~

                                                   _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::enableAckPayload()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:700:51: error: '_BV' was not declared in this scope

   write_register(FEATURE,read_register(FEATURE) | _BV(EN_ACK_PAY) | _BV(EN_DPL) );

                                                   ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:700:51: note: suggested alternative: '_B'

   write_register(FEATURE,read_register(FEATURE) | _BV(EN_ACK_PAY) | _BV(EN_DPL) );

                                                   ^~~

                                                   _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::setAutoAck(uint8_t, bool)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:770:16: error: '_BV' was not declared in this scope

       en_aa |= _BV(pipe) ;

                ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:770:16: note: suggested alternative: '_B'

       en_aa |= _BV(pipe) ;

                ^~~

                _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:774:17: error: '_BV' was not declared in this scope

       en_aa &= ~_BV(pipe) ;

                 ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:774:17: note: suggested alternative: '_B'

       en_aa &= ~_BV(pipe) ;

                 ^~~

                 _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::setPALevel(rf24_pa_dbm_e)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:799:14: error: '_BV' was not declared in this scope

   setup &= ~(_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;

              ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:799:14: note: suggested alternative: '_B'

   setup &= ~(_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;

              ^~~

              _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'rf24_pa_dbm_e RF24::getPALevel()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:832:46: error: '_BV' was not declared in this scope

   uint8_t power = read_register(RF_SETUP) & (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;

                                              ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:832:46: note: suggested alternative: '_B'

   uint8_t power = read_register(RF_SETUP) & (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;

                                              ^~~

                                              _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'bool RF24::setDataRate(rf24_datarate_e)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:864:14: error: '_BV' was not declared in this scope

   setup &= ~(_BV(RF_DR_LOW) | _BV(RF_DR_HIGH)) ;

              ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:864:14: note: suggested alternative: '_B'

   setup &= ~(_BV(RF_DR_LOW) | _BV(RF_DR_HIGH)) ;

              ^~~

              _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'rf24_datarate_e RF24::getDataRate()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:907:43: error: '_BV' was not declared in this scope

   uint8_t dr = read_register(RF_SETUP) & (_BV(RF_DR_LOW) | _BV(RF_DR_HIGH));

                                           ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:907:43: note: suggested alternative: '_B'

   uint8_t dr = read_register(RF_SETUP) & (_BV(RF_DR_LOW) | _BV(RF_DR_HIGH));

                                           ^~~

                                           _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::setCRCLength(rf24_crclength_e)':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:933:47: error: '_BV' was not declared in this scope

   uint8_t config = read_register(CONFIG) & ~( _BV(CRCO) | _BV(EN_CRC)) ;

                                               ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:933:47: note: suggested alternative: '_B'

   uint8_t config = read_register(CONFIG) & ~( _BV(CRCO) | _BV(EN_CRC)) ;

                                               ^~~

                                               _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'rf24_crclength_e RF24::getCRCLength()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:957:46: error: '_BV' was not declared in this scope

   uint8_t config = read_register(CONFIG) & ( _BV(CRCO) | _BV(EN_CRC)) ;

                                              ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:957:46: note: suggested alternative: '_B'

   uint8_t config = read_register(CONFIG) & ( _BV(CRCO) | _BV(EN_CRC)) ;

                                              ^~~

                                              _B

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp: In member function 'void RF24::disableCRC()':

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:974:46: error: '_BV' was not declared in this scope

   uint8_t disable = read_register(CONFIG) & ~_BV(EN_CRC) ;

                                              ^~~

C:\Users\User\Documents\Arduino\libraries\RF24-master\RF24.cpp:974:46: note: suggested alternative: '_B'

   uint8_t disable = read_register(CONFIG) & ~_BV(EN_CRC) ;

                                              ^~~

                                              _B

Multiple libraries were found for "nRF24L01.h"

 Used: C:\Users\User\Documents\Arduino\libraries\RF24-master

 Not used: C:\Users\User\Documents\Arduino\libraries\NRFLite

exit status 1

Error compiling for board Seeeduino XIAO.



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

I suspect I have multiple problems as it took a lot of playing around with the libraries to get the RF24-Master library to work. I may have messed that up somehow (but it was working with the Nano...so...??).

Here is a copy of the sketch being loaded:

[code]

#include <SPI.h> #include "nRF24L01.h" #include "RF24.h"

int DataMgs[1]; RF24 radio(9,10); const uint64_t pipe = 0xE14BC8F482LL; int Relay1 = 5;

void setup() { pinMode(Relay1, OUTPUT); Serial.begin(57600); radio.begin(); radio.openReadingPipe(1,pipe); radio.startListening(); }

void loop() { if (radio.available()) { bool done = false;
while (!done) { done = radio.read(DataMgs, 1); Serial.print("NRF24L01 Receiver: ");
Serial.println(DataMgs[0]);

  if (DataMgs[0] == 1)
  {
    delay(10);
    digitalWrite(Relay1, HIGH);
  }

  if (DataMgs[0] == 2)
  {
    delay(10);digitalWrite(Relay1, LOW);
  }
  delay(100);
}

} else { Serial.println("Waiting for signal..."); } } [/code]

Any guidance would be greatly appreciated. Thanks

P.S. If anyone can guide me through this issue I can send some crypto your way- thanks again.

0

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.