Is it possible to connect more than one I2C device to an Arduino Uno? I know that the SCL and SDA pins are on analog pins A4 and A5 respectively, but there are also two pins labeled SCL and SDA located next to the AREF pin on the other side of the board. Does that mean I can connect multiple devices to the same board and, if so, how?

For context, I'm currently working on creating a robotic arm that matches its movements to the movements of my arm (I believe this is called a telepresence robot). To do so, I wanted to use a couple of IMUs (specifically the MPU-6050) to record the movements of my wrist and shoulder. Using the TinyMPU6050 library by Gabriel Milan, I've already been able to establish communication with one IMU, but I'm struggling with the second one. I'm already communicating with the arm via the Uno's SPI interface so I can't use that to communicate with a second IMU, although I know it's possible.

I know that similar questions have been asked before, but none of the questions I could find had the exact answers that I needed, so I thought I would ask anyway. This code that I currently have works for one IMU, but I don't know where to begin to add a second one (if it's even possible). Any help that I can get would be greatly appreciated. Cheers!

#include <TinyMPU6050.h>

MPU6050 IMU_1(Wire);

void setup() {

  //initializing and calibrating `IMU_1`

  while (!Serial) {
    //empty while loop

void loop() {
  Serial.print("X angle = ");
  Serial.print("Y angle = ");
  Serial.print("Z angle = ");


1 Answer 1


I2C is a multi-drop bus. That means that one set of I2C pins are designed to have multiple devices on it as long as each device has a unique address.

On an Uno the discrete I2C pins and the A4/A5 I2C pins are the same pins. The discrete pins are an attempt to provide a cross-platform standard location for the I2C signals for shields.

  • So, since I don't have a way of connecting multiple devices to the A4/A5 pins, does that mean that I can connect one IMU to the A4/A5 pins and one to the discrete pins and have it still function as long as I give them different addresses? Thanks for your help!
    – Tobias Guo
    Jul 13, 2021 at 19:42
  • Yep. Except you don't normally "give" I2C devices addresses (unless you're making them yourself) - you usually are able to select between a couple of addresses using special pins on the I2C devices. If you can't select different addresses then you have the option of an "I2C multiplexer" to select between them.
    – Majenko
    Jul 13, 2021 at 20:02
  • Adding on to Majenko, you might find A1, A2, A3 on your I2C device, usually these are not connected, by soldering them (individually) you can change the address of your device, which you can then change in your code
    – Coder9390
    Jul 14, 2021 at 1:08

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.