Timer STM32 #error This code is designed to run on STM32F/L/H/G/WB/MP1 platform! Please check your Tools->Board setting

Question

I have installed the library of TimerInterrupt_Generic for ArduinoSTM32 module via Arduino IDE, so i have tried to test the example of library as you can see below:

and i have gotten this error:

TimerInterruptLEDDemo:45:4: error: #error This code is designed to run on STM32F/L/H/G/WB/MP1 platform! Please check your Tools->Board setting.
   #error This code is designed to run on STM32F/L/H/G/WB/MP1 platform! Please check your Tools->Board setting.
    ^
In file included from /home/so/snap/arduino/current/Arduino/libraries/TimerInterrupt_Generic/examples/STM32/TimerInterruptLEDDemo/TimerInterruptLEDDemo.ino:64:0:
/home/so/snap/arduino/current/Arduino/libraries/TimerInterrupt_Generic/src/TimerInterrupt_Generic.h:86:4: error: #error Unsupported Board! Please check your Tools->Board setting.
   #error Unsupported Board! Please check your Tools->Board setting.
    ^
exit status 1
#error This code is designed to run on STM32F/L/H/G/WB/MP1 platform! Please check your Tools->Board setting.

Also, This question is asked here:

https://github.com/khoih-prog/TimerInterrupt_Generic/issues/2

Answer 1

The Roger Clark's STM32 core you're using is not currently supported. I don't know in the future if I can add that core into the supported list.

You have to use this Arduino_Core_STM32.

Convert to new core by following the intructions in Getting Started