1

Arduino: 1.8.13 (Windows Store 1.8.42.0) (Windows 10), Board: "Arduino Nano, ATmega328P"

Sketch uses 934 bytes (3%) of program storage space. Maximum is 30720 bytes.

Global variables use 9 bytes (0%) of dynamic memory, leaving 2039 bytes for local variables. Maximum is 2048 bytes.

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x49

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x49

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x49

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x49

An error occurred while uploading the sketch

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x49

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x49

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x49

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x49

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x49

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x49

This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.

4
  • 2
    Do you have the right COM port selected? Is your Nano a cheap chinese clone that may not even have the bootloader installed (I have had that before...)? Has it ever worked, or is this your first attempt with this board?
    – Majenko
    Commented Sep 10, 2020 at 12:13
  • 1
    Does this answer your question? "avrdude: stk500_getsync(): not in sync: resp=0x00," aka Some Dude Named Avr Won't Let Me Upload My Program
    – Juraj
    Commented Sep 10, 2020 at 14:47
  • First try the "Old bootloader" answer
    – Juraj
    Commented Sep 10, 2020 at 16:14
  • The old boot loader fixed it for me. A lot of the Chinese boards I used have that issue.
    – Ananas_hoi
    Commented Sep 11, 2020 at 6:14

2 Answers 2

1

For me selecting the ATmega328P (Old Bootloader) from the Tools --> Processor menu in the Arduino IDE solved the problem.

See: https://gyorgybalassy.wordpress.com/2020/10/16/arduino-programmer-is-not-responding-not-in-sync-error/

0

I had the same problem with an Arduino Micro. When the upload starts, press once the reset button.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.