Uploading simple sketches seems to work when I run the Arduino program as root (
sudo). I would like to run it as a regular user. Has anyone faced the same problem before and fixed it?
Here is what I obtained from
$ lsusb Bus 002 Device 022: ID 2341:0043 Arduino SA Uno R3 (CDC ACM)
And the Arduino program identifies it as
/dev/ttyACM0. Here are its permissions:
$ ls -l /dev/ttyACM0 crw-rw---T 1 root dialout 166, 0 Mar 14 22:03 /dev/ttyACM0
Here is the output from
When I upload an sketch from the examples, as a regular user, I encounter this error:
avrdude:stk500_recv(): programmer not responding
Any suggestions are welcome.
dmesgfor the device file that is registered.
/dev/ttyACM0: USB ACM device. So, it doesn't seem like problem to me. On the other hand, the logs from compiling and uploading( had to enable them in Preferences), seem promising. I just can't seem to copy them from the arduino program :(. (may be they are writing to a file somewhere?)