-2

i want to make a uselessbox .i connected the circuit correctly,i checked every thing several times and every thing is in right place[ based on descriptions and pattern],but when i turn it on,the box servo closes the door and then handservo starts to turn off the switch ,the code says:[the boxservo opens the door then handservo starts to turn off the switch,when the switch is off and handservo returned to its place then boxservo closes the door]but my box works like this(the boxservo closes the door then handservo starts to turn off the switch,when the switch is off and handservo returned to its place,then boxservo opens the door).what should i do to solve this problem?Useless box wiring and code

this is the code that i have uploaded:

#include <Servo.h>                        

Servo handServo;                          
Servo boxServo;

int switchStatus=0, action=1, vot, randNumber=0;                 
const int ledPin = 13;                    
const int frontSwitchPin = 2;
const int handServoPin = 5;
const int boxServoPin = 6;


void setup()
{
  Serial.begin(9600);

  pinMode(ledPin, OUTPUT);                  
  digitalWrite(ledPin,HIGH);

  handServo.attach(handServoPin);              
  boxServo.attach(boxServoPin);
  handServo.write(180);                        
  boxServo.write(70);

  //randomSeed(analogRead(0));
}


void loop()
{
  switchStatus = digitalRead(frontSwitchPin); 
  //action = random(1,16);

  if (switchStatus == LOW){                   

    if (action == 1)
    {
      Serial.println("Action 1");          
      for (int i = 70; i <= 110; i++)
      {
        boxServo.write(i);
        delay(20);
      }
      for (int i = 180; i >= 35; i--)
      {
        handServo.write(i);
        delay(20);
      }
      delay(1000);
      handServo.write(26);
      delay(200);
      for (int i = 26; i <=180; i++)
      {
        handServo.write(i);
        delay(20);
      }
      for (int i = 110; i >= 70; i--)
      {
        boxServo.write(i);
        delay(20);
      }
      action++;
    }


    else if (action == 2)
    {
      Serial.println("Action 2");         
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      delay(550);
      handServo.write(26);
      delay(550);
      handServo.write(180);
      delay(550);
      boxServo.write(70);
      delay(1500);
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      delay(3000);
      boxServo.write(70);
      action++;
    }

    else if (action == 3)
    {
      Serial.println("Action 3");         
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      delay(1000);
      boxServo.write(70);
      delay(2000);
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      handServo.write(26);
      delay(550);
      handServo.write(180);
      delay(500);
      boxServo.write(70);
      action++;
    }

    else if (action == 4)
    {
      Serial.println("Action 4");         
      for (int i = 70; i <= 110; i++)
      {
        boxServo.write(i);
        delay(20);
      }
      for (int i = 180; i >= 35; i--)
      {
        handServo.write(i);
        delay(20);
      }
      delay(2000);
      handServo.write(26);
      delay(200);
      handServo.write(180);
      delay(400);
      boxServo.write(70);
      action++;
    }

    else if (action == 5)
    {
      Serial.println("Action 5");     
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      delay(2000);
      handServo.write(65);
      delay(550);
      handServo.write(40);
      delay(200);
      handServo.write(65);
      delay(200);
      handServo.write(40);
      delay(200);
      handServo.write(65);
      delay(200);
      handServo.write(40);
      delay(200);
      handServo.write(65);
      delay(200);
      handServo.write(40);
      delay(200);
      handServo.write(65);
      delay(200);
      handServo.write(40);
      delay(200);
      handServo.write(65);
      delay(2000);
      handServo.write(26);
      delay(400);
      handServo.write(180);
      delay(400);
      boxServo.write(70);
      action++;
    }

    else if (action == 6)             
    {
      Serial.println("Action 6");      
      for (int i = 70; i <110; i++)
      {
        boxServo.write(i);
        delay(20);
      }
      delay(1000);
      for (int i = 0; i < 12; i++)
      {
        for (int j = 70; j <= 110; j++){
          boxServo.write(j);
          delay(6);
        }
        delay(200);
      }
      for (int i = 180; i >= 35; i--)
      {
        handServo.write(i);
        delay(30);
      }
      handServo.write(26);
      delay(400);
      handServo.write(180);
      delay(400);
      boxServo.write(70);
      delay(1500);
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      delay(3000);
      boxServo.write(80);
      action++;
    }

    else if (action == 7)
    {
      Serial.println("Action 7");      
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      delay(400);
      handServo.write(26);
      delay(1000);
      for (int i = 0; i < 6; i++)
      {
        for (int j = 70; j <= 110; j++){
          boxServo.write(j);
          delay(6);
        }
        delay(200);
      }
      delay(500);
      handServo.write(180);
      delay(400);
      boxServo.write(70);
      action++;
    }

    else if (action == 8)
    {
      Serial.println("Action 8");    
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      handServo.write(26);
      delay(2000);
      for (int i = 0; i < 7; i++)
      {
        handServo.write(75);
        delay(100);
        handServo.write(40);
        delay(100);
      }
      delay(500);
      handServo.write(180);
      delay(1000);
      boxServo.write(70);
      action++;
    }

    else if (action == 9)
    {
      Serial.println("Action 9");      
      for (int i = 70; i <= 105; i++){
        boxServo.write(i);
        delay(6);
      }
      delay(2000);
      boxServo.write(110);
      for (int i = 180; i >=35; i--)
      {
        handServo.write(i);
        delay(40);
      }
      delay(500);
      handServo.write(26);
      delay(200);
      for (int i = 26; i <=180; i++)
      {
        handServo.write(i);
        delay(40);
      }
      boxServo.write(70);
      delay(2000);
      boxServo.write(100);
      delay(3000);
      boxServo.write(70);
      action++;
    }


    else if (action == 10)
    {
      Serial.println("Action 10");      
      for (int i = 70; i <= 105; i++)
      {
        boxServo.write(i);
        delay(100);
      }
      delay(1000);
      for (int i = 0; i < 10; i++)
      {
        for (int j = 70; j <= 100; j++){
          boxServo.write(j);
          delay(6);
      }
        delay(100);
      }
      boxServo.write(110);
      delay(100);
      handServo.write(26);
      delay(650);
      handServo.write(180);
      delay(400);
      boxServo.write(70);
      action++;
    }

    else if (action == 11)
    {
      Serial.println("Action 11");     
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      handServo.write(26);
      delay(2000);
      for (int i = 0; i < 3; i++)
      {
        handServo.write(65);
        delay(200);
        handServo.write(40);
        delay(200);
      }
      delay(1500);
      handServo.write(180);
      delay(400);
      boxServo.write(70);
      delay(1500);
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      handServo.write(26);
      delay(3000);
      handServo.write(180);
      delay(400);
      boxServo.write(70);
      action++;
    }

    else if (action == 12)
    {
      Serial.println("Action 12");    
      for (int i = 70; i <= 110; i++)
      {
        boxServo.write(i);
        delay(50);
      }
      delay(1000);
      for (int i = 180; i >= 26; i--)
      {
        handServo.write(i);
        delay(50);
      }
      delay(2000);
      handServo.write(26);
      delay(200);
      handServo.write(180);
      delay(400);
      boxServo.write(70);
      action++;
    }

    else if (action == 13)
    {
      Serial.println("Action 13");     
      for (int i = 70; i <= 110; i++){
        boxServo.write(i);
        delay(6);
      }
      delay(2000);
      for (int i = 180; i >= 60; i--)
      {
        handServo.write(i);
        delay(40);
      }
      for (int i = 0; i < 3; i++)
      {
        handServo.write(60);
        delay(200);
        handServo.write(40);
        delay(800);
      }
      handServo.write(26);
      delay(2000);
      handServo.write(180);
      delay(500);
      boxServo.write(70);
      action++;
    }

    else if (action == 14)
    {
      Serial.println("Action 14");     
      for (int i = 70; i <= 105; i++){
        boxServo.write(i);
        delay(6);
      }
      delay(4000);
      boxServo.write(110);
      handServo.write(26);
      delay(650);
      handServo.write(180);
      delay(500);
      boxServo.write(100);
      delay(4000);
      boxServo.write(70);
      action++;
    }

    else if (action == 15)
    {
      Serial.println("Action 15");   
      for (int i = 70; i <= 105; i++){
        boxServo.write(i);
        delay(6);
      }
      delay(1000);
      for (int i = 0; i < 3; i++)
      {      
        for (int j = 70; j <= 105; j++){
          boxServo.write(j);
          delay(50);
        }
        for (int j = 105; j >= 70; j--)
        {
          boxServo.write(j);
          delay(50);
        }
      }
      for (int j = 70; j <= 110; j++){
        boxServo.write(j);
        delay(50);
      }
      for (int i = 180; i >= 35; i--)
      {
        handServo.write(i);
        delay(40);
      }
      delay(1000);
      handServo.write(26);
      delay(400);
      handServo.write(180);
      delay(400);
      boxServo.write(70);
      action = 1;
    }

  }

}
Improve this question
7
  • please edit your post ... convert the wall of words into clear sentences .....what is the actual problem that the program is exhibiting?
    – jsotola
    Mar 21, 2020 at 13:40
  • And please point us to the action, that is doing problematic, so that we know, where to search in your long code
    – chrisl
    Mar 21, 2020 at 14:28
  • you are mistaken about this the boxservo works contrary to the code ...... it should say the boxservo works exactly as programmed
    – jsotola
    Mar 21, 2020 at 16:58
  • when the switch is off boxservo opens the door and when the switch is on boxservo closes the door that is the problem.it's supposed to open the door when the switch is on and close the door when the switch is off.
    – amir
    Mar 25, 2020 at 15:35
  • If the switch is mounted upside down, then pushing the switch up would close the box; but you need it to open the box instead. In that case, turn the switch so that pushing it up would open the box.
    – JRobert
    Mar 25, 2020 at 18:02

1 Answer 1

Reset to default
1

You have probably installed the box servo backwards so that when it tries to open it actually closes and vice versa.

Improve this answer
3
  • no im sure that it is not bacward
    – amir
    Mar 25, 2020 at 15:23
  • Then you probably have a servo that is wired in reverse. You need to change the code to reverse the door movement servo.
    – tavis
    Mar 26, 2020 at 11:08
  • i don't know exactly how to change the code.can you help me to change it?please
    – amir
    Mar 26, 2020 at 16:10

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge that you have read and understand our privacy policy and code of conduct.

Not the answer you're looking for? Browse other questions tagged or ask your own question.