I try to save and read data from 93LC46B EEPROM using SPI with Arduino UNO. I'm following this article https://www.arduino.cc/en/Tutorial/SPIEEPROM . So far I have correctly connected EEPROM pinout (as shown in 93LC46B EEPROM datasheet) with arduino MISO, MOSI, SS, CLK, I copied the code from link and here is the problem, I cant save data to EEPROM, it should be filled with buffer but it is not, whats more everytime I try to read data there are different values on same addresses. How can i solve this problem ? Thanks in advance
1
-
1Post your circuit and the relevant code and what you see going wrong and what you expect. – Michel Keijzers Jul 20 '19 at 9:50
Add a comment
|
The quick answer is that 93LC46B is not compatible with AT25HP512. You can not use that tutorial. There are many differences.
Have a look at this blog instead: http://owlsan.blogspot.com/2012/10/accessing-93c4693c46n-serial-eeprom.html