I am trying to program mBot using Arduino IDE. I am connected to the mBot using USB on COM7, I am able to upload a code created in mBlock 3.4.11 fine, using "Arduino Mode" as the editing mode. I would like to proceed to more complex coding now and for this I want to be able to edit the source code directly. The source code seen in the MBlock application seems to be read only, there is a button which should allow editing the code, called "Edit with Arduino". When I press this button, the Arduino IDE opens and I am able to edit the code. The trouble is I seem to be unable to send the code edited this way into the mBot.

When I use the Arduino IDE Sketch/Upload menu item, the code is compiled, but when sending it, I always get following error:

avrdude: stk500v2_ReceiveMessage(): timeout

Note: I was editing and uploading Arduino code before with both Ardino IDE and VisualStudio visualMicro (now Arduino IDE for Visual Studio) without any issues.

I do not know exactly how is the mBlock application handling the upload, but while doing so a folder with the project is created, which contains the following buildprefs.txt - perhaps this could help to understand what it is doing:

build.arch = AVR
build.board = AVR_UNO
build.core = arduino
build.core.path = X:\Users\UserName\mblockExe\Arduino\hardware\arduino\avr\cores\arduino
build.extra_flags = 
build.f_cpu = 16000000L
build.mcu = atmega328p
build.path = X:\Users\UserName\AppData\Local\Temp\build3998294614124133332.tmp
build.project_name = project_followLineAuto0_0.cpp
build.source.path = X:\Users\UserName\AppData\Roaming\com.makeblock.Scratch3.4.11\Local Store\scratchTemp\project_followLineAuto0_0
build.system.path = X:\Users\UserName\mblockExe\Arduino\hardware\arduino\avr\system
build.usb_flags = -DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
build.usb_manufacturer = "Unknown"
build.variant = standard
build.variant.path = X:\Users\UserName\mblockExe\Arduino\hardware\arduino\avr\variants\standard
build.verbose = true
build.warn_data_percentage = 75
compiler.S.extra_flags = 
compiler.S.flags = -c -g -x assembler-with-cpp
compiler.ar.cmd = avr-ar
compiler.ar.extra_flags = 
compiler.ar.flags = rcs
compiler.c.cmd = avr-gcc
compiler.c.elf.cmd = avr-gcc
compiler.c.elf.extra_flags = 
compiler.c.elf.flags = {compiler.warning_flags} -Os -Wl,--gc-sections
compiler.c.extra_flags = 
compiler.c.flags = -c -g -Os {compiler.warning_flags} -ffunction-sections -fdata-sections -MMD
compiler.cpp.cmd = avr-g++
compiler.cpp.extra_flags = 
compiler.cpp.flags = -c -g -Os {compiler.warning_flags} -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD
compiler.elf2hex.cmd = avr-objcopy
compiler.elf2hex.extra_flags = 
compiler.elf2hex.flags = -O ihex -R .eeprom
compiler.ldflags = 
compiler.objcopy.cmd = avr-objcopy
compiler.objcopy.eep.extra_flags = 
compiler.objcopy.eep.flags = -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
compiler.path = {runtime.tools.avr-gcc.path}/bin/
compiler.size.cmd = avr-size
compiler.warning_flags = -w
compiler.warning_flags.all = -Wall -Wextra
compiler.warning_flags.default = 
compiler.warning_flags.more = -Wall
compiler.warning_flags.none = -w
  • Which Arduino IDE do you use? How did you get it? Which operating system? May we see the code (just curious)? – Jot Jan 6 at 14:09
  • @Jot The Arduino IDE is installed by the mBlock application. The version I have is 1.6.5. I am running Windows 10 x64 Pro. – Suma Jan 6 at 14:12
  • That is an old version. The newest version is 1.8.8. Here is more information about mBot: github.com/Makeblock-official/mBot The schematic is in the "pcb" folder. As far as I can tell the hardware and software of the mBot is okay, they know what they are doing. You could buy a cheap uno clone for 3 dollars to learn more about c++ arduino programming. – Jot Jan 6 at 14:26
  • "That is an old version. The newest version is 1.8.8". Well, that is a version which is bundled with mBlocks. As it is working fine, I am not sure if it is worth messing with the installation. Regarding the C++ arduino programming, I already have experience with that (I own one Uno and one Mega board). I only had trouble making the C code working with the mBot. – Suma Jan 6 at 15:32

Be sure to select correct board (Arduino UNO) and port.

See this guide for details: https://www.arduino.cc/en/Guide/ArduinoUno#toc5

Your Answer

By clicking "Post Your Answer", you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.