0

I created the circuit in this schematic on protoboard, schamatic

and the code, https://github.com/elkayem/midi2cv

I use a dual opamp and a single dac, because i only need note and velocity. The opto i use is, H11L1

It works but has a strange issue that i can not figure out.

The author says the code supports midi notes from 21 to 108.

When I send midi notes to test the device,

(Arduino powered with +12, TL082 Opamp powered with +15 to GND )

The notes <= 36 gives +15V in the output of the opamp. The note 37 gives +3.43V The note 38 gives +1.7V . . .then it increments as expected until note 108 which gives +7.52 V

Also to add I have +1.5V DC offset on the both outputs of the opamp. (This, i can live with but i would love it not to happen. )

I would be very happy if you help me on this, thank you.

  • Find out what voltages are output by the DAC, and what voltages the opamp can handle. – CL. Jan 5 at 22:02
0

I changed the opamp to LM358 and all problems solved it works perfectly!

If you have enough motivation and time please explain me why, but i will research and learn anyway.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.