0
#include <SoftwareSerial.h>
#define DEBUG true

SoftwareSerial esp8266(10, 11); // RX, TX

void setup() { // Open serial communications and wait for port to open:
  Serial.begin(9600); //for monitoring purposes

  sendCommand("AT+CIFS+RST\r\n", 2000, DEBUG); // reset module
  sendCommand("AT+IPR=115200\r\n", 1000, DEBUG);
  sendCommand("AT+CWMODE=1\r\n", 1000, DEBUG); // configure as access point
  sendCommand("AT+CWJAP=\"ABCDEFG\",\"12345678\"\r\n", 3000, DEBUG); //connect to a network with name ABCDEFG with password 12345678
  delay(1000);
  sendCommand("AT+CIFSR\r\n", 1000, DEBUG); // get ip address
  sendCommand("AT+CIPSTA=\"192.168.43.16\"\r\n", 1000, DEBUG);
  sendCommand("AT+CIPMUX=1\r\n", 1000, DEBUG); // configure for multiple connections
  sendCommand("AT+CIPSERVER=1,6625\r\n", 1000, DEBUG); // turn on server on port 6625
  Serial.println("Server Ready");

}

void loop() { // run over and over
  if (esp8266.available()) {
    if (esp8266.find("+IPD,0,")) {
      delay(10);
      esp8266.find(":");
      delay(10);
      char letter = esp8266.read();
      Serial.print(letter); //for monitoring purposes
      //Gets the value/char from android app
    }


String sendCommand(String command, const int timeout, boolean debug) {
  String response = "";
  esp8266.print(command); // send the read character to the esp8266
  long int time = millis();
  while ((time + timeout) > millis()) {
    while (esp8266.available()) {
      // The esp has data so display its output to the serial window
      char c = esp8266.read(); // read the next character.
      response += c;
    }
  }

  if (debug) {
    Serial.print(response);
  }
  return response;
}
6
  • 1
    I formatted your code and now you can see two } missing to close the loop. (and misplaced comment). and I added char before letter
    – Juraj
    Apr 29, 2018 at 5:23
  • sir..i add change the code but still, i cant compile it, it still says 'sendCommand' was not declared in this scope.. Apr 29, 2018 at 5:33
  • Then edit your question to reflect the new code, so that we can help you
    – chrisl
    Apr 29, 2018 at 6:56
  • You did notice that you declared and defined SendCommand() inside loop(), right? Apr 29, 2018 at 7:29
  • sir sorry for being slow.. what loop() do you mean sir? Apr 29, 2018 at 7:46

1 Answer 1

2

In loop you have three opening braces and one closing brace. This won't end well:

void loop() { // run over and over
  if (esp8266.available()) {
    if (esp8266.find("+IPD,0,")) {
      delay(10);
      esp8266.find(":");
      delay(10);
      char letter = esp8266.read();
      Serial.print(letter); //for monitoring purposes
      //Gets the value/char from android app
    }

Two more closing braces would fix it.

1
  • tnx sir..i can upload it now.. sory again sir...can i ask again sir.. i can upload it now but when use at command in serial monitor, no words is going out,, Apr 29, 2018 at 9:26

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.