1

I installed the required drivers for the board. But I cannot still upload a program to the board. It says that

avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53 Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/ Copyright (c) 2007-2014 Joerg Wunsch

     System wide configuration file is "C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.10.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf"

     Using Port                    : usb
     Using Programmer              : stk500v2

avrdude: usbdev_open(): did not find any USB device "usb" (0x03eb:0x2104)

avrdude done. Thank you.

An error occurred while uploading the sketch

1
  • Please explain exactly what you're trying to accomplish. The error indicates you're doing either an Upload Using Programmer or Burn Bootloader rather than a standard upload over serial. Turn on File > Preferences > Show verbose output during: > upload, do an upload, when it fails you will see a button on the right side of the orange bar "Copy error messages". Click that button. Edit your question and paste in the full verbose upload output.
    – per1234
    Mar 18, 2018 at 22:05

1 Answer 1

1

Can be many causes since you did not provide more info (like what circuit, what application). But in general:

  • Wrong software installation
  • Try another similar chip/device, maybe this one is broken
  • Is it recognized by USB at all?
  • Bad USB cable
  • Did you select the right board in the IDE (Arduino IDE?)

Possible solution:

  • Reinstall IDE
  • Change chip
  • Change Arduino
  • Use different cable
2
  • It was not recognized at all. The error message is avrdude: Version 6.3, compiled on Jan 17 2017 at 12:00:53 Copyright (c) 2000-2005 Brian Dean, bdmicro.com Copyright (c) 2007-2014 Joerg Wunsch System wide configuration file is "C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.10.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf" Using Port : usb Using Programmer : stk500v2 avrdude: usbdev_open(): did not find any USB device "usb" (0x03eb:0x2104) avrdude done. Thank you. An error occurred while uploading the sketch Mar 18, 2018 at 19:31
  • In that case, try reinstalling the software, checking the USB (system) software, check if other avr's work, or check on another computer. Mar 18, 2018 at 19:46

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.