I have been building a project using an arduino nano clone. It uses the CH340 chip. It worked perfectly, and a week later it now doesnt.
When I want to upload code in arduino IDE I get the error below
avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xe1
To try to fix the issue, I bought a USBasp board to program the nano, however, when I run AVRdude, it reads
avrdude: auto set sck period (because given equals null) avrdude: warning: cannot set sck period. please check for usbasp firmware update. avrdude: error: programm enable: target doesn't answer. 1 avrdude: initialization failed, rc=-1 Double check connections and try again, or use -F to override this check.}
If anyone can help please do