I got one of these cheap STM8 boards from China and was hoping to find a way to use this with arduino code.
Does anyone know of an arduino boot loader and board package that works with them ?
-
you get nothing with these links !!!!– modouOct 14, 2020 at 12:29
Add a comment
|
2 Answers
Start the Arduino-IDE. In File->Preferences, Settings tab, enter
https://github.com/tenbaht/sduino/raw/master/package_sduino_stm8_index.json
Open Tools->Board:...->Boards Manager
Find Sduino by typing 'sd' into the search line
Click on the list entry
Click on Install.
This link is more comprehensive
There is a bootloader on those chips to slow serial programming. A much easier way to to get a stlink debugger.
There are also some packages that allow Arduino styled programming on those chips. I wrote one myself that runs on iar and I think at least one on sdcc.
Those chips are really nice.
-
Hi, thanks for your reply. So how would I get started with programming this in the arduino IDE? There is a whole community around the STM32 and it's use with the arduino IDE, I followed some simple instructions from stm32duino.com to get going with the stm32. Is there an equivalent with this STM8 board? Aug 30, 2017 at 20:14
-
Not to my knowledge, unfortunately. The stm32duino site has links to my stm8duino port on GitHub if you wish to try. It does require the iar workbench however .– dannyfAug 30, 2017 at 20:22