4

I have this breadboard, and there is no indication on it about what is positive/negative on it.

enter image description here

In comparison, this other breadboard (pic from the internet) DOES have indications:

enter image description here

Can anyone give me a hint ?

  • 1
    Hint: there is no negative or positive. – gre_gor May 9 '17 at 16:05
  • @gre_gor like this pjrc.com/store/breadboard.jpg I want to wire two pins to ground on breadboard – N Sharma May 9 '17 at 16:06
  • @Williams You could do that as usually as you would with a printed or marked board. – Sagnik Pradhan May 9 '17 at 16:11
  • 4
    It doesn't matter. You could label them yourself with a red and blue permanent marker. – gre_gor May 9 '17 at 16:17
  • Also from my experience, your breadboard has side rails wider apart than the other breadboard and a power supply intended for a breadboard won't fit. – gre_gor May 9 '17 at 16:21
8

You decide which rails are positive and which are negative when you connect them to the + an - from your power supply or battery.

A breadboard isn't polarised per se. It's just a bunch of cross-connections inside a perforated plastic case. No active or passive components inside.

Some manufacturers may choose to paint indications regarding where to connect the positive and negative rails, but those are just a guideline. Ultimately it's your choice, you're free to connect + and - wherever you want in the breadboard rails.

  • 1
    so If I wire GND of battery to first row, do I need to plug other wires which need to be GND besides to that wire in a same row ? – N Sharma May 9 '17 at 16:12
  • 1
    Yes indeed. Moreover, if you find it convenient to use a row in the opposite side of the breadboard as GND too, just connect it via wire to the first GND row and boom, you've got another GND row. As simple and easy as that. – Enric Blanco May 9 '17 at 16:18
3

As gre_gor said. A simple breadboard contains of rows and columns of connections but sometimes for convenience manufacturer marks or prints Positive and Negative symbol along the row as they are usually used to power a circuit

0

Connections in the two strips along the edge running top to bottom in your image are connected (in the way you have the image placed) top to bottom. So, all pins are connected to each other in each of those rows. Within the inner secions, the connections are (in your image) across from one side to the other.

You decide how you want the power supply cable to be connected to your breadboard, just becasue there's no indicators means that they simply haven't drawn any coloured lines on the breadboard. You can draw red and black lines on however you wish.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.