0

I'm trying to use the arduino DUE board as a AVR Programmer. My target device is atmega328p. After uploading the ArduinoISP into the DUE Board. I've tried to let a pin toggle using the following code:

#define F_CPU 10000000
#include <avr/io.h>
#include <util/delay.h>


int main (){
    DDRD |= (1<< PD7);
    for(;;){
        PORTD ^= (1<< PD7);
        _delay_ms(1000);
    }
    return 0;
}

I want to use the internal oscillator and based this example I've adjust the makefile:

DEVICE     = atmega328p
CLOCK      = 8000000
PROGRAMMER = -c arduino -P COM10 -b 19200 
OBJECTS    = main.o
FUSES      = -U lfuse:w:0x62:m -U hfuse:w:0xd9:m -U efuse:w:0xff:m

the problem that I have is that when run :

make flash

I get the following :

enter image description here

and yes the port COM10 is definitely correct.

does anyone have a suggestion how to solve this ?

thanks in advance !

marked as duplicate by Avamander Aug 22 '17 at 16:02

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

  • What are the fuses on the Atmega328P? And does it have a bootloader? You can find out this stuff if you have a spare Uno or similar around. – Nick Gammon Jan 23 '17 at 5:50
  • 1
    I'm voting to close this question because questions about avrdude errors that are long abandoned without followup from the asker are effectively unanswerable. – Chris Stratton Aug 22 '17 at 14:57
  • As there's a chance a specific keyword combination will direct people here from Google, I think it's better if it's marked as duplicate, so there's a link on top of the page that contains possible steps to solve this problem. – Avamander Aug 22 '17 at 16:03
0

There error you have is from avrdude failing to get a communication link established to the 'programmer' (which manipulates the target.)

Here is a link that may help with the connection

Stk500 error

Here is another relative link that may help

Arduino ISP on DUE

Best of luck.

Not the answer you're looking for? Browse other questions tagged or ask your own question.