I have the Arduino Pro Micro and I would like to use all the analog pins that I can on it.
It currently looks like it has a total of 9 Analog pins that can be used.
A0, A1, A2, A3, A6, A7, A8, A9 and A10.
However, I am unsure how to call these pins since all of those are also digital pins.
Would A0-A3 be defined as:
#define analog1 A0;
#define analog2 A1;
#define analog3 A2;
#define analog4 A3;
While the other pins would be this?:
#define analog5 4;
#define analog6 6;
#define analog7 8;
#define analog8 9;
#define analog9 10;
Then just call:
analogRead(analog1);
analogRead(analog2);
.....
analogRead(analog8);
analogRead(analog10);
Would that be the correct way of defining the 9 analog pins?