2

I'm planning to make a handbrake for my racing simulator (Assetto Corsa) and I wanted to know how can I transform arduino into a joystick so the game can read the analog input?

Thanks in advance, and sorry for my bad english.

1
  • You would need some sort of Human Interface working on your computer. A Leonardo should work but you would have to reprogram the HID interface so that it gets recognised by the PC as a Joystick. See this page for some info on how to use the potentiometer joystick.
    – Stefa168
    May 17, 2015 at 21:05

2 Answers 2

3

I made this video and github just for this about a year ago.

Breadboard

And here is the code:

/*
2-axis joystick connected to an Arduino Micro
to output 4 pins, up, down, left & right

If you are using pull down resistors, change all the HIGHs to LOWs and LOWs to HIGH.
This skectch is using pull up resistors.

*/

int UD = 0;
int LR = 0;
/* Arduino Micro output pins*/
int DWN = 13;
int UP = 12;
int LEFT = 11;
int RT = 10;
/* Arduino Micro Input Pins */
int IUP=A0;
int ILR=A1;

int MID = 10; // 10 mid point delta arduino, use 4 for attiny
int LRMID = 0;
int UPMID = 0;
void setup(){

  pinMode(DWN, OUTPUT);
  pinMode(UP, OUTPUT);  
  pinMode(LEFT, OUTPUT); 
  pinMode(RT, OUTPUT);

  digitalWrite(DWN, HIGH);
  digitalWrite(UP, HIGH);
  digitalWrite(LEFT, HIGH);
  digitalWrite(RT, HIGH);

  //calabrate center
  LRMID = analogRead(ILR);
  UPMID = analogRead(IUP);
}

void loop(){

  UD = analogRead(IUP);
  LR = analogRead(ILR);
  // UP-DOWN
  if(UD < UPMID - MID){
   digitalWrite(DWN, LOW);
  }else{
   digitalWrite(DWN, HIGH);
  }

  if(UD > UPMID + MID){
   digitalWrite(UP, LOW);
  }else{
   digitalWrite(UP, HIGH);
  }
  // LEFT-RIGHT
  if(LR < LRMID - MID){
   digitalWrite(LEFT, LOW);
  }else{
   digitalWrite(LEFT, HIGH);
  }

  if(LR > LRMID + MID){
   digitalWrite(RT, LOW);
  }else{
   digitalWrite(RT, HIGH);
  }

  delay(400);


}
3
  • This is not what I meant. I want to connect the arduino to my computer and use it to control the handbrake in my game. I want to make my computer recognize the arduino as a controller. But thanks for replying =D
    – ItsaMeTuni
    Aug 2, 2015 at 23:53
  • You can use my example as a starting point. However I would assume you will need to create a customer driver for "Assetto Corsa".
    – PhillyNJ
    Aug 2, 2015 at 23:57
  • Everything was just handed to you except for the PC side. Now you need to ask yourself: What does the game need for input: text? a logic signal? How can it receive input - through a serial port? The kbd only? Bluetooth? How can I provide that from what the Arduino and @PhillyNJ's code and diagram already make available - text messages to the serial port? Logic signals to RTS and DTR of 2 serial ports? Patch into the keyboard cable? (If your difficulty is on the PC side, this is probably not the right place to get help).
    – JRobert
    Oct 31, 2015 at 18:40
0

Never tried it with the Arduino, but it's quite easy to do with Teensy (which is mostly compatible with Arduino).

Teensyduino actually includes several examples.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.