Skip to main content
Arduino

Return to Question

Question Protected by Juraj♦
the url has changed for grove wiki
Source Link
edit approved Mar 11, 2018 at 10:03
shivams
edit approved Mar 11, 2018 at 10:03
shivams
  • 103
  • 4

What type of connector does GROVEGROVE use?

I'm interested in wiring some old sensors so they're compatible with GROVE, so I first need to identify the connector so I can buy the housing and pins to crimp. It looks to be some type of JST connector, but there are many different sizes, each with incompatible pitches and a lot of retailers often advertise them incorrectly. Unfortunately, I can't find any documentation of the connector on Seeedstudio's site.

What type of connector does GROVE use?

I'm interested in wiring some old sensors so they're compatible with GROVE, so I first need to identify the connector so I can buy the housing and pins to crimp. It looks to be some type of JST connector, but there are many different sizes, each with incompatible pitches and a lot of retailers often advertise them incorrectly. Unfortunately, I can't find any documentation of the connector on Seeedstudio's site.

What type of connector does GROVE use?

I'm interested in wiring some old sensors so they're compatible with GROVE, so I first need to identify the connector so I can buy the housing and pins to crimp. It looks to be some type of JST connector, but there are many different sizes, each with incompatible pitches and a lot of retailers often advertise them incorrectly. Unfortunately, I can't find any documentation of the connector on Seeedstudio's site.

Tweeted twitter.com/StackArduino/status/674810765925335040
Added tags.
Link
edit approved Mar 5, 2015 at 17:33
Paolo Zanchi
edit approved Mar 5, 2015 at 17:33
Paolo Zanchi
  • 941
  • 7
  • 22
Source Link
Cerin
Cerin
  • 1.7k
  • 2
  • 26
  • 44

What type of connector does the GROVE system use?

What type of connector does GROVE use?

I'm interested in wiring some old sensors so they're compatible with GROVE, so I first need to identify the connector so I can buy the housing and pins to crimp. It looks to be some type of JST connector, but there are many different sizes, each with incompatible pitches and a lot of retailers often advertise them incorrectly. Unfortunately, I can't find any documentation of the connector on Seeedstudio's site.