Skip to main content
Arduino

Return to Answer

Fixed the post a bit.
Source Link
edit approved Nov 30, 2015 at 15:04
Avamander
edit approved Nov 30, 2015 at 15:04
Avamander
  • 624
  • 2
  • 11
  • 35

iI had the exact same problem. iI tried installing the IDE in another laptop and uploaded the program from that laptop. Problem solved. then iThen I came back to my laptop, uninstalled the IDE and re-install it.. it worksstarted working.

howeverHowever, iI wasn't satisfied because i cantI couldn't find the source of the problem... so iI tried running everything again the same exact way.. i. I found the problem but not sure if that can be the actual cause of it..

inIn my project, iI needed to carry out serial communication between arduino and MATLAB (GUI).. inIn order to see/verify the output(type) of MATLAB (GUI) serial data, iI used HYPERTERMINAL and also VIRTUAL SERIAL PORT EMULATOR. iI noticed that every time when when hyperterminal is running or VSPE is running while my serial monitor is on it screws up the uploading feature of the program. imI'm not sure if itsit's because of the VSPE or HYPERTERMINAL, but reinstalling the IDE worked for me. :-)

i had the exact same problem. i tried installing the IDE in another laptop and uploaded the program from that laptop. Problem solved. then i came back to my laptop, uninstalled the IDE and re-install it.. it works.

however, i wasn't satisfied because i cant find the source of the problem.. so i tried running everything again the same exact way.. i found the problem but not sure if that can be the actual cause of it..

in my project, i needed to carry out serial communication between arduino and MATLAB (GUI).. in order to see/verify the output(type) of MATLAB (GUI) serial data, i used HYPERTERMINAL and also VIRTUAL SERIAL PORT EMULATOR. i noticed that every time when when hyperterminal is running or VSPE is running while my serial monitor is on it screws up the uploading feature of the program. im not sure if its because of the VSPE or HYPERTERMINAL, but reinstalling the IDE worked for me. :-)

I had the exact same problem. I tried installing the IDE in another laptop and uploaded the program from that laptop. Problem solved. Then I came back to my laptop, uninstalled the IDE and re-install it.. it started working.

However, I wasn't satisfied because I couldn't find the source of the problem... so I tried running everything again the same exact way... I found the problem but not sure if that can be the actual cause of it.

In my project, I needed to carry out serial communication between arduino and MATLAB (GUI). In order to see/verify the output(type) of MATLAB (GUI) serial data, I used HYPERTERMINAL and also VIRTUAL SERIAL PORT EMULATOR. I noticed that every time when when hyperterminal is running or VSPE is running while my serial monitor is on it screws up the uploading feature of the program. I'm not sure if it's because of the VSPE or HYPERTERMINAL, but reinstalling the IDE worked for me.

Removed mild expletive (which is against SE rules).
Source Link
Peter Bloomfield
Peter Bloomfield
  • 11k
  • 9
  • 47
  • 87

i had the exact same damn problem. i tried installing the IDE in another laptop and uploaded the program from that laptop. Problem solved. then i came back to my laptop, uninstalled the IDE and re-install it.. it works.

however, i wasn't satisfied because i cant find the source of the problem.. so i tried running everything again the same exact way.. i found the problem but not sure if that can be the actual cause of it..

in my project, i needed to carry out serial communication between arduino and MATLAB (GUI).. in order to see/verify the output(type) of MATLAB (GUI) serial data, i used HYPERTERMINAL and also VIRTUAL SERIAL PORT EMULATOR. i noticed that every time when when hyperterminal is running or VSPE is running while my serial monitor is on it screws up the uploading feature of the program. im not sure if its because of the VSPE or HYPERTERMINAL, but reinstalling the IDE worked for me. :-)

i had the exact same damn problem. i tried installing the IDE in another laptop and uploaded the program from that laptop. Problem solved. then i came back to my laptop, uninstalled the IDE and re-install it.. it works.

however, i wasn't satisfied because i cant find the source of the problem.. so i tried running everything again the same exact way.. i found the problem but not sure if that can be the actual cause of it..

in my project, i needed to carry out serial communication between arduino and MATLAB (GUI).. in order to see/verify the output(type) of MATLAB (GUI) serial data, i used HYPERTERMINAL and also VIRTUAL SERIAL PORT EMULATOR. i noticed that every time when when hyperterminal is running or VSPE is running while my serial monitor is on it screws up the uploading feature of the program. im not sure if its because of the VSPE or HYPERTERMINAL, but reinstalling the IDE worked for me. :-)

i had the exact same problem. i tried installing the IDE in another laptop and uploaded the program from that laptop. Problem solved. then i came back to my laptop, uninstalled the IDE and re-install it.. it works.

however, i wasn't satisfied because i cant find the source of the problem.. so i tried running everything again the same exact way.. i found the problem but not sure if that can be the actual cause of it..

in my project, i needed to carry out serial communication between arduino and MATLAB (GUI).. in order to see/verify the output(type) of MATLAB (GUI) serial data, i used HYPERTERMINAL and also VIRTUAL SERIAL PORT EMULATOR. i noticed that every time when when hyperterminal is running or VSPE is running while my serial monitor is on it screws up the uploading feature of the program. im not sure if its because of the VSPE or HYPERTERMINAL, but reinstalling the IDE worked for me. :-)

Source Link
Hrdip
Hrdip
  • 71
  • 1
  • 1

i had the exact same damn problem. i tried installing the IDE in another laptop and uploaded the program from that laptop. Problem solved. then i came back to my laptop, uninstalled the IDE and re-install it.. it works.

however, i wasn't satisfied because i cant find the source of the problem.. so i tried running everything again the same exact way.. i found the problem but not sure if that can be the actual cause of it..

in my project, i needed to carry out serial communication between arduino and MATLAB (GUI).. in order to see/verify the output(type) of MATLAB (GUI) serial data, i used HYPERTERMINAL and also VIRTUAL SERIAL PORT EMULATOR. i noticed that every time when when hyperterminal is running or VSPE is running while my serial monitor is on it screws up the uploading feature of the program. im not sure if its because of the VSPE or HYPERTERMINAL, but reinstalling the IDE worked for me. :-)