I have been trying to push the data of temp, humidity, and pressure from a sensor to MQTT using ESP 32Cam, and was able to do using the following code:

pressure = bme.readPressure();

//Convert the value to a char array
char preString[16];
dtostrf(pressure, 1, 2, preString);
Serial.print("Pressure: ");
Serial.println(preString);
client.publish("esp32/pressure", preString);

When I started off with the following code for getting the mac address:

chipid=ESP.getEfuseMac();//The chip ID is essentially its MAC address(length: 6 bytes).
Serial.printf("ESP32 Chip ID = %04X",(uint16_t)(chipid>>32));//print High 2 bytes
Serial.printf("%08X\n",(uint32_t)chipid);//print Low 4bytes.

But when I tried to publish the Chip id, that I was getting on the serial monitor, to the MQTT, an error came up with this:

call of overloaded 'String(uint64_t)' is ambiguous

Here's my code that I tried:

char macValue[16];
String(ESP.getEfuseMac()).toCharArray(macValue,16);
client.publish("esp32/ChipID", macValue);

I have been trying to push the data of temp, humidity, and pressure from a sensor to MQTT using ESP 32Cam, and was able to do using the following code:

pressure = bme.readPressure();

//Convert the value to a char array
char preString[16];
dtostrf(pressure, 1, 2, preString);
Serial.print("Pressure: ");
Serial.println(preString);
client.publish("esp32/pressure", preString);

When I started off with the following code for getting the mac address:

chipid=ESP.getEfuseMac();//The chip ID is essentially its MAC address(length: 6 bytes).
Serial.printf("ESP32 Chip ID = %04X",(uint16_t)(chipid>>32));//print High 2 bytes
Serial.printf("%08X\n",(uint32_t)chipid);//print Low 4bytes.

But when I tried to publish the Chip id, that I was getting on the serial monitor, to the MQTT, an error came up with this:

call of overloaded 'String(uint64_t)' is ambiguous

Here's my code that I tried:

char macValue[16];
String(ESP.getEfuseMac()).toCharArray(macValue,16);
client.publish("esp32/ChipID", macValue);