Skip to main content
Arduino

Return to Answer

Improved formatting.
Source Link
sa_leinad
sa_leinad
  • 3.2k
  • 1
  • 22
  • 51

afterAfter 2 days of troubleshooting iI found the solution

  1. Use 3.3 volt external supply
  2. Use voltage dividers to make 3.3 volt compatible to module
  3. go outside(open space) That it

That's it

after 2 days of troubleshooting i found

  1. Use 3.3 volt external supply
  2. Use voltage dividers to make 3.3 volt compatible to module
  3. go outside(open space) That it

After 2 days of troubleshooting I found the solution

  1. Use 3.3 volt external supply
  2. Use voltage dividers to make 3.3 volt compatible to module
  3. go outside(open space)

That's it

Source Link
Jarus
Jarus
  • 21
  • 1

after 2 days of troubleshooting i found

  1. Use 3.3 volt external supply
  2. Use voltage dividers to make 3.3 volt compatible to module
  3. go outside(open space) That it