Timeline for I have 4 motors connected to their own ESC (that is connected to a power distribution board), how do I connect this to Arduino uno? (Drone)
Current License: CC BY-SA 3.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Apr 5, 2017 at 15:02 | comment | added | Martman | this is where i will attach the battery: hobbyking.com/en_us/… to my power distribution board and from that board i will connect the voltage to the RAW and the other pin to the gnd. Does the PDB work as a converter? | |
| Apr 5, 2017 at 15:00 | comment | added | Dat Ha | Pro Mini's regulators are quiet bad. I'll suggest to put it to a down converter before passing it to the Arduino. | |
| Apr 5, 2017 at 14:46 | comment | added | Martman | Hi! I was just wondering. I have a 4s battery now that I plan to hookup to a arduino pro mini 5v board instead of a Uno-board. So instead of putting the battery wire to the Vln of the arduino uno I will put it on the "RAW" on the arduino pro mini. Will a 4s or 3s lipo make any difference? | |
| Dec 25, 2016 at 20:39 | vote | accept | Martman | ||
| Dec 25, 2016 at 18:08 | comment | added | Dat Ha | I've updated the answer. | |
| Dec 25, 2016 at 18:07 | history | edited | Dat Ha | CC BY-SA 3.0 |
added 195 characters in body
|
| Dec 25, 2016 at 17:34 | comment | added | Martman | This is one of my first projects so therefor I am very rookie in some areas! | |
| Dec 25, 2016 at 17:29 | comment | added | Martman | Thanks a lot for the answer! So far so good :) 1. Ok! 2. Ok! 3/4. Do i do the following: Solder all of the VCC of the ESC (the red wire) the same way like I do with the ground and then I connect it to a power supply module? Is this a power supply module I can use? aliexpress.com/item/… It is for a breadboard i think but can it work with an arduino uno? When it comes to powering teh arduino I am a bit unsure how to do it. | |
| Dec 25, 2016 at 16:42 | history | answered | Dat Ha | CC BY-SA 3.0 |