Skip to main content
Arduino

Return to Answer

added 12 characters in body
Source Link
jfpoilpret
jfpoilpret
  • 9.1k
  • 7
  • 37
  • 54

I wonder if you destroyed your Arduino's voltage regulator. 

If the arduinoArduino was connected to the stepper motor via the A4988 when you powered the arduinoArduino with a 12V supply, the stepper motor might have drawn current from the Arduino's regulator. This current is likely ~2As, which is far more than the tens of milliamps the Arduino is designed to output. This kind of current draw could quite possibly destroy the regulator on your Uno.This

This could also explain why your computer restarted. USB ports on computers are designed to provide an output voltage to their USB devices, so if you provide a voltage on the USB power lines your computer is also driving, you can short your ports if the two voltages are not exactly the same. This is actually why USB cables have the A vs B end design - they mark which side should supply power (A), and which should be powered (B). The Arduino might have provided a voltage on the USB cable's 5V line and thus shorted something in your computer that provides the voltage for your USB ports. (I believe Unos are not designed to be powered by both USB and the 12V connectors simultaneously). 

If the regulator fried on your Uno, you might have had a voltage that was way off of the expected 5v on the USB port. A well designed USB port will usually try protect itself in a situation like this, often causing the computer to shutdown or the USB bus to deactivate until restarting the computer.

You could check your Uno's voltage regulator with a multimeter or better yet and oscilloscope to see if that is in fact the problem. If so, you could solder a new one on pretty cheaply and quickly. However, there is no guarantee nothing else got fried, in which case buying a new $10-20 Uno looks like a pretty appealing option.

I wonder if you destroyed your Arduino's voltage regulator. If the arduino was connected to the stepper motor via the A4988 when you powered the arduino with a 12V supply, the stepper motor might have drawn current from the Arduino's regulator. This current is likely ~2As, which is far more than the tens of milliamps the Arduino is designed to output. This kind of current draw could quite possibly destroy the regulator on your Uno.This could also explain why your computer restarted. USB ports on computers are designed to provide an output voltage to their USB devices, so if you provide a voltage on the USB power lines your computer is also driving, you can short your ports if the two voltages are not exactly the same. This is actually why USB cables have the A vs B end design - they mark which side should supply power (A), and which should be powered (B). The Arduino might have provided a voltage on the USB cable's 5V line and thus shorted something in your computer that provides the voltage for your USB ports. (I believe Unos are not designed to be powered by both USB and the 12V connectors simultaneously). If the regulator fried on your Uno you might have had a voltage that was way off of the expected 5v on the USB port. A well designed USB port will usually try protect itself in a situation like this, often causing the computer to shutdown or the USB bus to deactivate until restarting the computer.

You could check your Uno's voltage regulator with a multimeter or better yet and oscilloscope to see if that is in fact the problem. If so, you could solder a new one on pretty cheaply and quickly. However, there is no guarantee nothing else got fried, in which case buying a new $10-20 Uno looks like a pretty appealing option.

I wonder if you destroyed your Arduino's voltage regulator. 

If the Arduino was connected to the stepper motor via the A4988 when you powered the Arduino with a 12V supply, the stepper motor might have drawn current from the Arduino's regulator. This current is likely ~2As, which is far more than the tens of milliamps the Arduino is designed to output. This kind of current draw could quite possibly destroy the regulator on your Uno.

This could also explain why your computer restarted. USB ports on computers are designed to provide an output voltage to their USB devices, so if you provide a voltage on the USB power lines your computer is also driving, you can short your ports if the two voltages are not exactly the same. This is actually why USB cables have the A vs B end design - they mark which side should supply power (A), and which should be powered (B). The Arduino might have provided a voltage on the USB cable's 5V line and thus shorted something in your computer that provides the voltage for your USB ports (I believe Unos are not designed to be powered by both USB and the 12V connectors simultaneously). 

If the regulator fried on your Uno, you might have had a voltage that was way off of the expected 5v on the USB port. A well designed USB port will usually try protect itself in a situation like this, often causing the computer to shutdown or the USB bus to deactivate until restarting the computer.

You could check your Uno's voltage regulator with a multimeter or better yet and oscilloscope to see if that is in fact the problem. If so, you could solder a new one on pretty cheaply and quickly. However, there is no guarantee nothing else got fried, in which case buying a new $10-20 Uno looks like a pretty appealing option.

Source Link
Giesbrecht
Giesbrecht
  • 111
  • 2

I wonder if you destroyed your Arduino's voltage regulator. If the arduino was connected to the stepper motor via the A4988 when you powered the arduino with a 12V supply, the stepper motor might have drawn current from the Arduino's regulator. This current is likely ~2As, which is far more than the tens of milliamps the Arduino is designed to output. This kind of current draw could quite possibly destroy the regulator on your Uno.This could also explain why your computer restarted. USB ports on computers are designed to provide an output voltage to their USB devices, so if you provide a voltage on the USB power lines your computer is also driving, you can short your ports if the two voltages are not exactly the same. This is actually why USB cables have the A vs B end design - they mark which side should supply power (A), and which should be powered (B). The Arduino might have provided a voltage on the USB cable's 5V line and thus shorted something in your computer that provides the voltage for your USB ports. (I believe Unos are not designed to be powered by both USB and the 12V connectors simultaneously). If the regulator fried on your Uno you might have had a voltage that was way off of the expected 5v on the USB port. A well designed USB port will usually try protect itself in a situation like this, often causing the computer to shutdown or the USB bus to deactivate until restarting the computer.

You could check your Uno's voltage regulator with a multimeter or better yet and oscilloscope to see if that is in fact the problem. If so, you could solder a new one on pretty cheaply and quickly. However, there is no guarantee nothing else got fried, in which case buying a new $10-20 Uno looks like a pretty appealing option.