3 added 1 character in body
source | link

I am about to Fourier analyse some data I've taken, but i need to know at which sampling rate the data was written to the serial monitor. I've found a lot of threads about how to increase it and such but not a single one that lays down some information about what the sampling-rate is.

My code is very simple, here it is:

      // the setup routine runs once when you press reset:
  void setup() {
    // initialize serial communication at 9600 bits per second:
    Serial.begin(9600);
  }

  // the loop routine runs over and over again forever:
  void loop() {
    // read the input on analog pin 0:
    int sensorValue = analogRead(A0);
    // print out the value you read:
    Serial.println(sensorValue);
  }

I am about to Fourier analyse some data I've taken, but i need to know at which sampling rate the data was written to the serial monitor. I've found a lot of threads about how to increase it and such but not a single one that lays down some information about what the sampling-rate is.

My code is very simple, here it is:

      // the setup routine runs once when you press reset:
  void setup() {
    // initialize serial communication at 9600 bits per second:
    Serial.begin(9600);
  }

  // the loop routine runs over and over again forever:
  void loop() {
    // read the input on analog pin 0:
    int sensorValue = analogRead(A0);
    // print out the value you read:
    Serial.println(sensorValue);
  }

I am about to Fourier analyse some data I've taken, but i need to know at which sampling rate the data was written to the serial monitor. I've found a lot of threads about how to increase it and such but not a single one that lays down some information about what the sampling-rate is.

My code is very simple, here it is:

      // the setup routine runs once when you press reset:
  void setup() {
    // initialize serial communication at 9600 bits per second:
    Serial.begin(9600);
  }

  // the loop routine runs over and over again forever:
  void loop() {
    // read the input on analog pin 0:
    int sensorValue = analogRead(A0);
    // print out the value you read:
    Serial.println(sensorValue);
  }
2 formating grammar
source | link

What is the sampling-rate of the analogread`analogRead()`?

I am about to fourieranalyseFourier analyse some data i'veI've taken, but i need to know at which sampling rate the data was written to the serialmonitorserial monitor. I've found alota lot of threads about how to increase it and such but not a single one that lays down some information about what the sampling-rate is.

My code is very simple, here it is:

      // the setup routine runs once when you press reset:
  void setup() {
    // initialize serial communication at 9600 bits per second:
    Serial.begin(9600);
  }

  // the loop routine runs over and over again forever:
  void loop() {
    // read the input on analog pin 0:
    int sensorValue = analogRead(A0);
    // print out the value you read:
    Serial.println(sensorValue);
  }

Thanks in advance

What is the sampling-rate of the analogread?

I am about to fourieranalyse some data i've taken, but i need to know at which sampling rate the data was written to the serialmonitor. I've found alot of threads about how to increase it and such but not a single one that lays down some information about what the sampling-rate is.

My code is very simple, here it is:

      // the setup routine runs once when you press reset:
  void setup() {
    // initialize serial communication at 9600 bits per second:
    Serial.begin(9600);
  }

  // the loop routine runs over and over again forever:
  void loop() {
    // read the input on analog pin 0:
    int sensorValue = analogRead(A0);
    // print out the value you read:
    Serial.println(sensorValue);
  }

Thanks in advance

What is the sampling-rate of the `analogRead()`?

I am about to Fourier analyse some data I've taken, but i need to know at which sampling rate the data was written to the serial monitor. I've found a lot of threads about how to increase it and such but not a single one that lays down some information about what the sampling-rate is.

My code is very simple, here it is:

      // the setup routine runs once when you press reset:
  void setup() {
    // initialize serial communication at 9600 bits per second:
    Serial.begin(9600);
  }

  // the loop routine runs over and over again forever:
  void loop() {
    // read the input on analog pin 0:
    int sensorValue = analogRead(A0);
    // print out the value you read:
    Serial.println(sensorValue);
  }
1
source | link

What is the sampling-rate of the analogread?

I am about to fourieranalyse some data i've taken, but i need to know at which sampling rate the data was written to the serialmonitor. I've found alot of threads about how to increase it and such but not a single one that lays down some information about what the sampling-rate is.

My code is very simple, here it is:

      // the setup routine runs once when you press reset:
  void setup() {
    // initialize serial communication at 9600 bits per second:
    Serial.begin(9600);
  }

  // the loop routine runs over and over again forever:
  void loop() {
    // read the input on analog pin 0:
    int sensorValue = analogRead(A0);
    // print out the value you read:
    Serial.println(sensorValue);
  }

Thanks in advance