Skip to main content
Arduino

Return to Question

tags edited
Link
edit approved Nov 8, 2018 at 14:21
Glorfindel
edit approved Nov 8, 2018 at 14:21
Glorfindel
  • 574
  • 1
  • 7
  • 18
Post Migrated Here from electronics.stackexchange.com (revisions)
Source Link
Defiler
Defiler

Arduino micro lost connection after first programming

I have just programmed a new micro, loaded the basic blink code in it. After that neither my laptop, nor my desktop sees it anyway with the following usb error:

Fri Apr  1 14:32:01 2016] usb 1-2: device descriptor read/64, error -62
[Fri Apr  1 14:32:01 2016] usb 1-2: device descriptor read/64, error -62
[Fri Apr  1 14:32:02 2016] usb 1-2: reset full-speed USB device number 8 using ohci_hcd
[Fri Apr  1 14:32:02 2016] usb 1-2: device descriptor read/64, error -62
[Fri Apr  1 14:32:02 2016] usb 1-2: device descriptor read/64, error -62
[Fri Apr  1 14:32:02 2016] usb 1-2: reset full-speed USB device number 8 using ohci_hcd
[Fri Apr  1 14:32:03 2016] usb 1-2: device not accepting address 8, error -62
[Fri Apr  1 14:32:03 2016] usb 1-2: reset full-speed USB device number 8 using ohci_hcd
[Fri Apr  1 14:32:03 2016] usb 1-2: device not accepting address 8, error -62
[Fri Apr  1 14:32:03 2016] usb 1-2: USB disconnect, device number 8
[Fri Apr  1 14:32:03 2016] usb 1-2: new full-speed USB device number 9 using ohci_hcd
[Fri Apr  1 14:32:04 2016] usb 1-2: device descriptor read/64, error -62
[Fri Apr  1 14:32:04 2016] usb 1-2: device descriptor read/64, error -62

If I push the reset button on it it comes back a bit then disappears again:

22620.495256] usb 1-2: New USB device found, idVendor=2341, idProduct=0037
[22620.495263] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[22620.495268] usb 1-2: Product: Arduino Micro   
[22620.495272] usb 1-2: Manufacturer: Arduino LLC
[22620.497393] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[22627.966141] usb 1-2: USB disconnect, device number 32
[22628.432089] usb 1-2: new full-speed USB device number 33 using ohci_hcd
[22628.572111] usb 1-2: device descriptor read/64, error -62

Anybody experienced this? I have tried to reconnect it multiple times to both computers, even tried a new cable doesn't help.