Timeline for Custom built Arduino is not working - double blinks
Current License: CC BY-SA 3.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Mar 4, 2016 at 11:05 | comment | added | haxpanel | I haven't got any 3D printer but an oven and a hair dryer. Am I still good? | |
| Mar 4, 2016 at 0:09 | comment | added | Nick Gammon♦ | 3D printer? And a bit of aluminium foil? Just remove the wire leading to the capacitor. When the upload starts briefly ground it to reset the processor (a quick tap) and then un-ground it. | |
| Mar 3, 2016 at 23:51 | comment | added | haxpanel | Ohh I see, mine is a 100uF one. I mixed up with the 100nF. The smallest I have now is a 1uF. I wish I could just quickly "download" one ... | |
| Mar 3, 2016 at 21:58 | comment | added | Nick Gammon♦ | Yes, but pin 8 should have a ground wire. You shouldn't rely on it being grounded through the chip. Also the capacitor in series with reset looks a lot larger than 0.1 µF. | |
| Mar 3, 2016 at 21:25 | comment | added | haxpanel | I've just checked it but the 22s are already grounded to pin 8 as that is a ground. I updated that area anyway according to your photo but having the same issue. I've built this entire stuff for 3 times but getting the same result. :( | |
| Mar 3, 2016 at 21:17 | history | answered | Nick Gammon♦ | CC BY-SA 3.0 |