This is the first time I'm using my Arduino. It's an Arduino UNO R3. I got two boards. One works, but the other doesn't. I changed the ATmega328P from the broken one to the good one and it works, so I can confirm that the controller works. The issue seems to be in the board.

When I plug the board it doesn't come up neither in Mac or in Windows. The LED blinks and output pins have voltage, but it seems that it's only getting electricity from the computer, it's like the data channels don't respond. The other board works perfectly both on Windows and Mac.

I checked the logs on the Mac and nothing changes when I plug the board. It's like I'm not plugging anything.

Is there a way to reset the board only? Maybe a component was badly soldered in the factory. I can't use the warranty because I got the board since last year and never used it until now.

This is the first time I'm using my Arduino. It's an Arduino UNO R3. I have two boards. One works, but the other doesn't. I changed the ATmega328P from the broken one to the good one and it works, so I can confirm that the controller works. The issue seems to be in the board.

When I plug the board it doesn't come up either in Mac or in Windows. The LED blinks and the output pins have voltage, but it seems that it's only getting electricity from the computer, it's like the data channels don't respond. The other board works perfectly both on Windows and Mac.

I checked the logs on the Mac and nothing changes when I plug the board. It's like I'm not plugging anything.

Is there a way to reset the board only? Maybe a component was badly soldered in the factory. I can't use the warranty because I got the board last year and never used it until now.

This is the first time I'm using my arduino. It's an Arduino UNO R3. I got two boards. One works, but the other doesn't. I changed the ATMEGA328P from the broken one to the good one and it works, so I can confirm that the controller works. The issue seems to be in the board.

When I plug the board it doesn't come up neither in Mac or in Windows. The led blinks and output pins have voltage, but it seems that it's only getting electricity from the computer, it's like the data channels don't respond. The other board works perfectly both on Windows and Mac.

I checked the logs on the Mac and nothing changes when I plug the board. It's like I'm not plugging anything.

Is there a way to reset the board only? Maybe a component was badly soldered in the factory. I can't use the warranty because I got the board since last year and never used it until now.

Thanks

This is the first time I'm using my Arduino. It's an Arduino UNO R3. I got two boards. One works, but the other doesn't. I changed the ATmega328P from the broken one to the good one and it works, so I can confirm that the controller works. The issue seems to be in the board.

When I plug the board it doesn't come up neither in Mac or in Windows. The LED blinks and output pins have voltage, but it seems that it's only getting electricity from the computer, it's like the data channels don't respond. The other board works perfectly both on Windows and Mac.

I checked the logs on the Mac and nothing changes when I plug the board. It's like I'm not plugging anything.

Is there a way to reset the board only? Maybe a component was badly soldered in the factory. I can't use the warranty because I got the board since last year and never used it until now.