Timeline for ATTiny to drive LEDs
Current License: CC BY-SA 3.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| May 28, 2015 at 4:40 | comment | added | AMADANON Inc. | I have done a similar project, and can verify it works well. Make sure you have a transistor between the attiny and the LEDs (and a resistor between the attiny and the transistor!), so the high amps & 12 volts aren't drawn through the attiny. If you step down the voltage from 12v to 5v, make sure you check that they have a common ground - measure the voltage between the car battery's ground (negative) and the attiny's ground. | |
| May 27, 2015 at 22:51 | vote | accept | Vajira Lasantha | ||
| May 27, 2015 at 22:34 | history | answered | Ignacio Vazquez-Abrams | CC BY-SA 3.0 |